No troubles with bubbles

Degassers improve fluidic instrument precision and reliability by removing dissolved gases from fluids before they outgas and form problem causing bubbles. Three main types of bubble removing products are available:

  • Teflon AF based degassers offer the widest range of chemical compatibility and are used to eliminate retention shifts and baseline fluctuations.
  • Silicone based degassers offer the highest flow rate capabilities for water based systems such as diagnostic and life science instrumentation to improve dispense accuracy and reliability.
  • Poridex based products provide rapid bubble remove for locations where bubble introduction cannot be avoided.

Degassing process

Degassing chamber

Dissolved gases are actively removed from a flowing liquid stream by vacuum via the IDEX Health & Science AF® membrane.

Degassing – How it works

Dissolved gasses in a fluidic system can often cause troubles. When the pressure or the temperature changes, the dissolved gasses can form bubbles which affect the accuracy, precision and performance of your equipment. On-line degassing is a very efficient way of removing dissolved gasses from the liquid and preventing bubble formation.

Why Degas Your Mobile Phase?

Dissolved air in HPLC mobile phases can result in flow rate instability and baseline disturbance.
Flow rate instability: Non-degassed mobile phase can outgas in the pump head, causing bubbles to be formed and trapped inside the head or check valves. These bubbles can cause flow disturbances and pressure fluctuations, resulting in flow rate instability.
Baseline disturbance: As the mobile phase passes through the column, it experiences a large pressure drop. Non-degassed mobile phase can outgas due to this pressure differential, causing air bubbles to form. Air bubbles passing through or lodging in the
flow cell cause detection disturbances, exhibited as baseline noise.

No Troubles with Bubbles

Biotech AB is specialized in degassing of liquids. With Systec components you can be sure to get degassers with the latest cutting edge technology. Except for our unique range of DEGASi® Standalone degassers, Biotech offers custom made degassing modules to fit your need. Biotech supplies degassing modules to some of the world’s largest instrument manufacturers.

DEBUBBLING

In many low pressure systems, such as diagnostic instruments, bubbles in the fluid stream can cause false detection readings and dispense anomalies. For these systems, the Systec Active Debubbler captures and removes bubbles before they can affect the instrument or the results. Unlike passive bubble traps where bubble removal is dependent on backpressure, the Active Debubbler can be installed before or after a pump and provides consistent debubbling regardless of the system conditions.

Debubbler implementation Debubbler implementation

Debubbling – How it works

Dissolved gases and bubbles in system liquids cause dispense volume anomalies in many instruments, negatively affecting both dispense precision and analytical accuracy. Now you have a choice of components for actively removing bubbles with or without also removing dissolved system gases. Online Vacuum Degassing offers operating convenience, high efficiency and low operating costs compared to other common degassing technologies.

Why Debubbling?

In medical analyzers, bubbles interfere with critical volumetric reagent dispenses and cause sample failures, wasting time and money. Because bubbles adhere to nearly every part of a dispensing system, high velocity or induced turbulent flow is often used to displace and discharge bubbles from the flow stream and into a waste area. These alternative processes waste reagents and are time consuming, unpredictable, and may additionally require designing the system to recognize bubbles are present.

No troubles with Bubbles

Biotech AB proudly presents a DEBUBBLER for removal of bubbles in liquids. Improve the precision and accuracy in your instrumentation with our new line of debubblers. The new debubbler can be used in every liquid transferring system where bubbles may occur; Dispensing, DNA-sequencing etc. Custom designed modules upon request. We offer total systems responsibility in the field of degassing and debubbling.

“The world’s first high flow rate,
in-line degasser, for organic solvents”

Degassi-Prep-Plus

DEGASi® PREP+

DEGASi PREP+

“It´s small, smart & silent…”

Degasi PLUS

DEGASi® PREP+ SERIES

Biotech_DEGASi_PLUS Series

Our latest addition to the DEGASi® standalone series is the DEGASi® PLUS. It can be equipped for a wide range of applications, depending on what kind of performance you need.

THE FIRST CHOICE

DEGASi® PLUS is a further development of degassers such as:

  • DEGASi®Classic
  • DEGASi®Micro
  • DEGASi®GPC
  • DEGASi®Semi-Prep
FEATURES
  • Much smaller footprint, height and weight
  • New vacuum pump using a smart board
  • Allmost silent
  • Available with 1-6 channels
  • Parallel connected vacuum chambers
  • Easier accessibility and visibility
  • Easier troubleshooting and replacement of parts
  • Short leadtime

Any questions?

If you have any inquiries about our products and services, we’re here to help.

Phone: +46 300 56 91 80
Email: info@biotechfluidics.com

Share This Story, Choose Your Platform!