-
Our Preparative Stand Alone Vacuum Degasser Systems are specifically designed for HPLC and other fluidic systems. The DEGASi PREP series is designed for flowrates from 15-50ml/min per channel. The system removes dissolved gases from the mobile phases to reduce retention time shifts and improve baseline stability, as the pump will work much more reliable. Removing dissolved gasses eliminates bubbles before they occur and removes oxygen which can interfere with UV detection methods. -
DEGASi® Prep+ uses a revolutionary new technology that makes it possible to degas organic solutions at higher flow rates in a cost-effective manner. That means you can get increased capacity at a lower price. DEGASi® Prep+ is a perfect choice for efficient degassing of many types of liquids at high flow rates, up to 75-100 mL /min per chamber. It is compatible with aqueous-organic liquids and alkanes, but not aggressive solvents like HFIP. The DEGASi® Prep+ degassers is available in different models with 1, 2, or 4 channels. In its standard configuration with 1/4-28 flat-bottom ports for 1/8” OD tubing, flow rates up to 75 mL/min can be degassed. The DEGASi® Prep+ Large and DEGASi® Prep+ XLarge, are instead configured with 5/16-24 flat-bottom ports for 3/16″ (4.8 mm) OD tubing, and with 1/2-20 flat-bottom ports for 1/4″ (6.4 mm) OD tubing, respectively, and can handle flow rates up to 100 mL/min. The unique DEGASi® Prep+ AUX degasser configuration is designed for flow rates up to 75-100 mL/min, and is also equipped with one additional auxiliary degassing channel of your choice for analytical flow rates. -
With virtually identical chemical resistance to PFA at a lower price, FEP tubing is great for general, low pressure applications. Compared to PTFE, FEP (fluorinated ethylene propylene) tubing is held to tighter tolerances and has lower gas permeability -
With virtually identical chemical resistance to PFA at a lower price, FEP tubing is great for general, low pressure applications. Compared to PTFE, FEP (fluorinated ethylene propylene) tubing is held to tighter tolerances and has lower gas permeability -
Our DuraLife II Stator is for the valve model MHP/MXP/MX/PD7980-XXX. Our stator materials have been researched and selected for their physical and mechanical strengths. Stators need replacement only if the ports or sealing surfaces become damaged. -
Our DuraLife II Stator is specifically designed for the valve model MHP/MXP/PD7970-XXX. Our stator materials have been researched and selected for their physical and mechanical strengths. Stators need replacement only if the ports or sealing surfaces become damaged. -
Our DuraLife Stator is specifically designed for the valve model MHP/MXP/PD7960-XXX. Our stator materials have been researched and selected for their physical and mechanical strengths. Stators need replacement only if the ports or sealing surfaces become damaged. -
Our DuraLife Stator is specifically designed for the valve model MHP/MXP7920-000. Our stator materials have been researched and selected for their physical and mechanical strengths. Stators need replacement only if the ports or sealing surfaces become damaged. -
Our DuraLife Stator is specifically designed for the valve model MXP/MHP/PD7900(-XXX(-X)). Our stator materials have been researched and selected for their physical and mechanical strengths. Stators need replacement only if the ports or sealing surfaces become damaged. -
Our End Fittings offers a dependable way to secure frits and connect tubing. Made from durable stainless steel this end fitting delivers reliability. It works with Valco, Parker and Waters port geometry. It has a 1/2" Outer Diameter and has a Parker port geometry. -
Our End Fittings offers a dependable way to secure frits and connect tubing. Made from durable stainless steel this end fitting delivers reliability. It works with Valco, Parker and Waters port geometry. It has a 1/2" Outer Diameter and has a Valco port geometry. -
Our End Fittings offers a dependable way to secure frits and connect tubing. Made from durable stainless steel this end fitting delivers reliability. It works with Valco, Parker and Waters port geometry. It has a 1/4" Diameter.
