• DEGASi® LifeSci Degasser

    The new DEGASi® LifeSci NG inline vacuum degasser is designed for full biocompatibility and reduced environmental impact. It was invented to efficiently remove dissolved gases from aqueous fluids before they outgas and form bubbles that impact precision dispensing or interfering with detection. By employing a silicone-type tubular membrane, this chamber quickly accomplishes highly efficient degassing of aqueous solutions in a construction totally free from metals and polyfluoroalkyl substances (PFAS), which are often encountered in the type of degassers that are designed for organic solvents. Its silicon-based biocompatible flow path is designed for life science applications such as benchtop clinical chemistry, immunoassays, flow cytometry, next-generation sequencing (NGS), spatial biology, and proteomics. This new degasser is thus highly suitable for environmental, food, healthcare, and biotechnology labs.
    The DEGASi® LifeSci NG stand-alone inline degasser is suitable for a wide range of life science applications demanding full biocompatibility and it complies with RoHS and REACH requirements. Its capacity is suitable for flow rates from 3 to 20 mL/min per channel, and this degasser is available with 1-3 degassing channels. The port design is 1/4-28 Flat-Bottom for connection of tubing with OD ranging from 1/16” to 1/8”. This degasser is exclusively intended for neutral aqueous solutions and not compatible with organic solvents in higher concentrations, nor with pH conditions away from the neutral realm.
    See Solvent Compatibility Chart »
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • Biotech Liquid Flow Meter – High Flow

    The series of Biotech Liquid Flow Meters enables easy, continuous, and integrated determination of liquid flow rates. With these devices, flow data is continuously and accurately recorded and stored in a computer application providing full flow control and documentation. The measurement principle of heat dispersion allows for unprecedented time resolution and provides new insights into flow variation and inconsistency. The internal flow cell has a minimal volume and the inline measurement is accomplished without any interference with the liquid or its flow path. Four different models are available for micro flow, analytical HPLC flow, preparative flow, and high volume flow rates.
    Details

  • Biotech Liquid Flow Meter – Preparative Flow

    The series of Biotech Liquid Flow Meters enables easy, continuous, and integrated determination of liquid flow rates. With these devices, flow data is continuously and accurately recorded and stored in a computer application providing full flow control and documentation. The measurement principle of heat dispersion allows for unprecedented time resolution and provides new insights into flow variation and inconsistency. The internal flow cell has a minimal volume and the inline measurement is accomplished without any interference with the liquid or its flow path. Four different models are available for micro flow, analytical HPLC flow, preparative flow, and high volume flow rates.
    Details

  • Biotech Liquid Flow Meter – Analytical Flow

    The series of Biotech Liquid Flow Meters enables easy, continuous, and integrated determination of liquid flow rates. With these devices, flow data is continuously and accurately recorded and stored in a computer application providing full flow control and documentation. The measurement principle of heat dispersion allows for unprecedented time resolution and provides new insights into flow variation and inconsistency. The internal flow cell has a minimal volume and the inline measurement is accomplished without any interference with the liquid or its flow path. Four different models are available for micro flow, analytical HPLC flow, preparative flow, and high volume flow rates.
    Details

  • Biotech Liquid Flow Meter – Micro Flow

    The series of Biotech Liquid Flow Meters enables easy, continuous, and integrated determination of liquid flow rates. With these devices, flow data is continuously and accurately recorded and stored in a computer application providing full flow control and documentation. The measurement principle of heat dispersion allows for unprecedented time resolution and provides new insights into flow variation and inconsistency. The internal flow cell has a minimal volume and the inline measurement is accomplished without any interference with the liquid or its flow path. Four different models are available for micro flow, analytical HPLC flow, preparative flow, and high volume flow rates.
    Details

  • Biotech Solvent Recycler, PEEK

    The Biotech Solvent Recycler is a completely stand-alone device with an integrated display to show current input and settings, and control keys to easily set its operational parameters. It is typically externally powered via 5V DC, but can also be powered and programmed via a USB connected computer running a terminal software application. The Biotech Solvent Recycler can reduce the mobile phase in isocratic HPLC for up to 90% by redirecting uncontaminated mobile phase into the container. The level of the input signal and setting parameters are displayed on a well-read four-digit LCD display. Valve position and the current display mode are indicated by LEDs placed next to the display. Instrument functions are operated via a membrane keyboard with six keys. Setting of operating parameters and online device activity tracking can also be performed from a PC using any terminal application. Its analog input accepts unipolar and bipolar signals in ranges of ± 1V or ±100 mV alternatively. Analog-to-digital converter provides data for further processing in embedded microcontroller. TTL (contact closure) input is used for the auto-zero function. This model has a PEEK solvent flow path, but the Biotech Solvent Recycler is also available with wetted material in PTFE.
    Details

  • Biotech Solvent Recycler, PTFE

    The Biotech Solvent Recycler is a completely stand-alone device with an integrated display to show current input and settings, and control keys to easily set its operational parameters. It is typically externally powered via 5V DC, but can also be powered and programmed via a USB connected computer running a terminal software application. The Biotech Solvent Recycler can reduce the mobile phase in isocratic HPLC for up to 90% by redirecting uncontaminated mobile phase into the container. The level of the input signal and setting parameters are displayed on a well-read four-digit LCD display. Valve position and the current display mode are indicated by LEDs placed next to the display. Instrument functions are operated via a membrane keyboard with six keys. Setting of operating parameters and online device activity tracking can also be performed from a PC using any terminal application. Its analog input accepts unipolar and bipolar signals in ranges of ± 1V or ±100 mV alternatively. Analog-to-digital converter provides data for further processing in embedded microcontroller. TTL (contact closure) input is used for the auto-zero function. This model has a PTFE solvent flow path, but the Biotech Solvent Recycler is also available with wetted material in PEEK.
    Details

  • SmartSaver™ Solvent Recycler, PTFE

    The SmartSaver™ solvent recycler from Biotech Fluidics saves up to 90% of mobile phase by redirection of the pure solvent to the solvent reservoir during the isocratic HPLC. Can be used with almost all manufacturers equipment and detectors as UV, fluorescens etc. SmartSaver™ brings quite new approach to solvent recycler design. Very compact instrument is powered directly from chromatography data system PC, no power adapter is required. User friendly software is provided to configure the parameters, and to perform on-line monitoring/audit trail. Analog input allows unipolar or bipolar operation within range of ± 1V. TTL/contact closure can be configured as start, auto-zero or valve position control input. This model has a PTFE solvent flow path, but the SmartSaver™ is also available with wetted material in PEEK.
    Details

  • DEGASi® FlatFilm Degasser

    The new DEGASi® FlatFilm degasser redefines the capabilities of inline degassers. This engineering marvel delivers double the degassing performance per unit volume, at ten times lower flow resistance, while also reducing evaporative solvent loss, relative to traditional tubular degasser designs. In addition, this new inline degasser provides an extremely silent operation with about thirty percent longer life expectancy compared to traditional constructions. It also offers a reduced environmental footprint by requiring only one tenth the amount of perfluoroalkylated (PFAS) polymers within the degassing membrane. The DEGASi® FlatFilm stand-alone inline degasser is suitable for a wide range of analytical and semi-preparative applications involving anything from biocompatible requirements to demanding organic solvent compatibility including hexane. The slim housing, recognized from the popular DEGASi® Plus series, occupies a small bench space (230 x 56 x 107 mm). The nominal flow rate is 6 mL/min per channel, and this degasser is available with 1-6 degassing channels each with a flow path of 500 µL. The port design is 1/4-28 Flat-Bottom for connection of tubing with OD ranging from 1/16” to 1/8”. See Solvent Compatibility Chart »
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • DEGASi® Integration Semi-Prep HFIP Degasser

    The DEGASi® Integration HFIP Semi-Prep degasser is especially designed for hexafluoroisopropanol (HFIP) often used in size-exclusion SEC and GPC applications. The port design is 1/4-28 Flat-Bottom for connection of tubing with OD ranging from 1/16” to 1/8”. This degasser is equipped with 1-5 chambers and with the unique stainless-steel stented flow path of 925 μL, it is also suitable for use with all common organic solvents including alkanes like hexane 3-6 mL/min. As with all DEGASi® Integration degassers, there is an output signal for the vacuum level, and you can expect very silent and trouble-free operation for many years. It is easy to exchange solvents in the degasser thanks to the low swept volume and efficient design of each channel. The internal patented closed-loop vacuum control assures ultra-stable degassing performance that minimize noise in your high-precision system. The degasser comes with advanced leak and error detection functions and three indicator LEDs to show current status. The housing occupies a reduced bench space (261 x 70 x 125 mm) and is easy to access for replacement of parts. The degasser is fully compatible with CE and RoHS directives. See Solvent Compatibility Chart »
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • DEGASi® Integration HFIP Degasser

    The DEGASi® Integration HFIP degasser is especially designed for hexafluoroisopropanol (HFIP) often used in size-exclusion SEC and GPC applications. The port design is 1/4-28 Flat-Bottom for connection of tubing with OD ranging from 1/16” to 1/8”. This degasser is equipped with 1-5 chambers and with the unique stainless-steel stented flow path of 480 μL, it is also suitable for use with all common organic solvents including alkanes like hexane up to 3 mL/min. As with all DEGASi® Integration degassers, there is an output signal for the vacuum level, and you can expect very silent and trouble-free operation for many years. It is easy to exchange solvents in the degasser thanks to the low swept volume and efficient design of each channel. The internal patented closed-loop vacuum control assures ultra-stable degassing performance that minimize noise in your high-precision system. The degasser comes with advanced leak and error detection functions and three indicator LEDs to show current status. The housing occupies a reduced bench space (261 x 70 x 125 mm) and is easy to access for replacement of parts. The degasser is fully compatible with CE and RoHS directives. See Solvent Compatibility Chart »
    Select options This product has multiple variants. The options may be chosen on the product page Details

  • DEGASi® Integration Semi-Prep GPC Degasser

    The DEGASi® Plus GPC Semi-Prep degasser is designed for straight phase chromatography applications with flow rates 3-6 mL/min. The port design is 1/4-28 Flat-Bottom for connection of tubing with OD ranging from 1/16” to 1/8”. This degasser is equipped with 1-5 chambers and with the stainless-steel stented flow path of 925 μL, it is intended for use with all common organic solvents including alkanes like hexane. As with all DEGASi® Integration degassers, there is an output signal for the vacuum level, and you can expect very silent and trouble-free operation for many years. It is easy to exchange solvents in the degasser thanks to the low swept volume and efficient design of each channel. The internal patented closed-loop vacuum control assures ultra-stable degassing performance that minimize noise in your high-precision system. The degasser comes with advanced leak and error detection functions and three indicator LEDs to show current status. The housing occupies a reduced bench space (261 x 70 x 125 mm) and is easy to access for replacement of parts. The degasser is fully compatible with CE and RoHS directives. See Solvent Compatibility Chart »
    Select options This product has multiple variants. The options may be chosen on the product page Details
This website uses cookies and embedded third-party services. To change settings and see more detailed information, see Cookie settings
Accept Reject

Third Party Embeds

These features show content from external sources like videos or social media. Approve by clicking the content, then save with Update Settings.

Tracking Cookies

Collects anonymous data on visits and page usage to help improve website performance.

Privacy Policy

From May 25, 2018, the General Data Protection Regulation (GDPR) applies as law in all EU member states.
Read more in our Privacy Policy »

Contact Information

Contact us at info@biotechfluidics.com if you have any questions regarding how we process your personal data, or if you wish for us to amend/delete your personal data.
Go to Top