-
The DEGASi® Plus UltraNano degasser is optimised for ultra-low flow rates of aqueous and organic liquids up to 25 μL/min. The port design is 10-32 Coned for connection of tubing with OD ranging from 1/32” to 1/16”. This degasser is equipped with 1-6 chambers with biocompatible flow path of only 6 μL for aqueous-organic liquids but is not compatible with hexane and similar organic solvents. As with all DEGASi® Plus degassers, you can expect very silent and trouble-free operation for many years. It is easy to exchange solvents in the degasser thanks to the low swept volume and efficient design of each channel. The internal patented closed-loop vacuum control assures ultra-stable degassing performance that minimize noise in your high-precision system. The degasser comes with advanced leak and error detection functions and a bicolour indicator LED to show current status. The slim housing occupies a small bench space (230 x 56 x 107 mm) and is easy to access for replacement of parts. The degasser is fully compatible with CE and RoHS directives. See Solvent Compatibility Chart » -
Our Preparative Stand Alone Vacuum Degasser Systems are specifically designed for HPLC and other fluidic systems. The DEGASi PREP series is designed for flowrates from 15-50ml/min per channel. The system removes dissolved gases from the mobile phases to reduce retention time shifts and improve baseline stability, as the pump will work much more reliable. Removing dissolved gasses eliminates bubbles before they occur and removes oxygen which can interfere with UV detection methods. -
DEGASi® Prep+ uses a revolutionary new technology that makes it possible to degas organic solutions at higher flow rates in a cost-effective manner. That means you can get increased capacity at a lower price. DEGASi® Prep+ is a perfect choice for efficient degassing of many types of liquids at high flow rates, up to 75-100 mL /min per chamber. It is compatible with aqueous-organic liquids and alkanes, but not aggressive solvents like HFIP. The DEGASi® Prep+ degassers is available in different models with 1, 2, or 4 channels. In its standard configuration with 1/4-28 flat-bottom ports for 1/8” OD tubing, flow rates up to 75 mL/min can be degassed. The DEGASi® Prep+ Large and DEGASi® Prep+ XLarge, are instead configured with 5/16-24 flat-bottom ports for 3/16″ (4.8 mm) OD tubing, and with 1/2-20 flat-bottom ports for 1/4″ (6.4 mm) OD tubing, respectively, and can handle flow rates up to 100 mL/min. The unique DEGASi® Prep+ AUX degasser configuration is designed for flow rates up to 75-100 mL/min, and is also equipped with one additional auxiliary degassing channel of your choice for analytical flow rates. -
The SmartSaver™ solvent recycler from Biotech Fluidics saves up to 90% of mobile phase by redirection of the pure solvent to the solvent reservoir during the isocratic HPLC. Can be used with almost all manufacturers equipment and detectors as UV, fluorescens etc. SmartSaver™ brings quite new approach to solvent recycler design. Very compact instrument is powered directly from chromatography data system PC, no power adapter is required. User friendly software is provided to configure the parameters, and to perform on-line monitoring/audit trail. Analog input allows unipolar or bipolar operation within range of ± 1V. TTL/contact closure can be configured as start, auto-zero or valve position control input. This model has a PEEK solvent flow path, but the SmartSaver™ is also available with wetted material in PTFE. -
The SmartSaver™ solvent recycler from Biotech Fluidics saves up to 90% of mobile phase by redirection of the pure solvent to the solvent reservoir during the isocratic HPLC. Can be used with almost all manufacturers equipment and detectors as UV, fluorescens etc. SmartSaver™ brings quite new approach to solvent recycler design. Very compact instrument is powered directly from chromatography data system PC, no power adapter is required. User friendly software is provided to configure the parameters, and to perform on-line monitoring/audit trail. Analog input allows unipolar or bipolar operation within range of ± 1V. TTL/contact closure can be configured as start, auto-zero or valve position control input. This model has a PTFE solvent flow path, but the SmartSaver™ is also available with wetted material in PEEK.
