-
Metric Threaded Adapters are used specifically to attach connectors with different threads. It is manufactured from chemically resistant PEEK, which has excellent thread strength. Our Adapter has a Female 5/16 Flat Bottom to Male M6 Flat-Bottom port configuration. It includes no fittings. Brochure -
Metric Threaded Adapters are used specifically to attach connectors with different threads. It is manufactured from chemically resistant PEEK, which has excellent thread strength. Our Adapter has a Female 10-32 Coned to Male M6 Flat-Bottom port configuration. It includes no fittings. Brochure -
Our PEEK, Metric Threaded Adapter Assembly is ideal for bringing together connectors with different threads. The P-626 has a Female 10-32 Coned to Female M6 Flat-Bottom design. It included (1) F-300 Fingertight Fitting. Brochure -
Our Metric Threaded Adapter is used specifically to attach connectors with different threads. It is made from PEEK, which is ideal for chemical resistance. It has a Female M6 Flat Bottom to Male 1/4-28 Flat-Bottom port configuration. It includes no fittings. Brochure -
Our Metric Flangeless Male Nut is easy to use, eliminates the need to flange tubing and are reusable. It is made of It is made with versatile Delrin(acetal resin) which allows the nut to resist cross threading or loosening during use. It comes with a M6 Flat-Bottom port configuration and is for 1.8mm, 2.0mm, 3.0mm and 1/8" OD tubing. Brochure -
Our Metric Flangeless Short Nut is easy to use, eliminates the need to flange tubing and is reusable. It's biocompatible PEEK construction ensures good pressure holding ability and long-term durability. It has a M6 thread port configuration and is for 1.8mm, 2.0mm, 3.0mm and 1/8"OD tubing. It comes variety of colors for your convenience. Our nut comes in black 10-Pack, blue 10-Pack and red 10-Pack. Brochure -
Our Metric Flangeless Short Nut is easy to use, eliminates the need to flange tubing and is reusable. It's biocompatible PEEK construction ensures good pressure holding ability and long-term durability. It has a M6 thread port configuration and is for 1.8mm, 2.0mm, 3.0mm and 1/8"OD tubing. It comes variety of colors for your convenience. Our nut comes in black, black 10-pack, blue, blue 10-pack, red, and red 10-pack. Brochure -
Our Metric Flangeless Short Nut is easy to use, eliminates the need to flange tubing and is reusable. It's biocompatible PEEK construction ensures good pressure holding ability and long-term durability. It has a M6 thread port configuration and is for 1.8mm, 2.0mm, 3.0mm and 1/8"OD tubing. It comes variety of colors for your convenience. Our nut comes in black, black-10 Pack, blue, blue 10-Pack, Red, and Red-10 Pack. Brochure
-
Our Metric Flangeless Short Male Nut is easy to use, eliminates the need to flange tubing and are reusable. It is made of It is made with versatile Delrin(acetal resin) which allows the nut to resist cross threading or loosening during use. It comes with a M6 Flat-Bottom port configuration and is for 1.8mm, 2.0mm, 3.0mm and 1/8" OD tubing. Brochure -
Our Metric Flangeless Short Nut is easy to use, eliminates the need to flange tubing and is reusable. It's biocompatible PEEK construction ensures good pressure holding ability and long-term durability. It has a M6 thread port configuration and is for 2.5mm OD tubing. It comes in black Brochure -
Our Metric Threaded Adapter is used specifically to attach connectors with different threads. It is made of PEEK which has excellent thread strength. It has a Female 1/4-28 to Male M6 Flat-Bottom port configuration and includes no fittings. Brochure -
Our low pressure Metric Union efficiently connects tubing in low pressure regions of a system where a dependable connection is imperative. Made from chemically resistant Delrin it delivers excellent thread strength. It has a M6 Flat Bottom thread port style and comes in black. Brochure -
Our low pressure Metric Union efficiently connects tubing in low pressure regions of a system where a dependable connection is imperative. Made from chemically resistant Delrin it delivers excellent thread strength. It has a M6 Flat Bottom thread port style and comes in black. Brochure -
Our low pressure Metric Union efficiently connects tubing in low pressure regions of a system where a dependable connection is imperative. Made from Tefzel (ETFE) it delivers excellent solvent resistance. It has a M6 Flat Bottom thread port style and comes in blue. Brochure -
Our Micro Filter Frit is for use specifically with smaller size filters used throughout HPLC systems. Our frit comes encased in a natural color PEEK polymer ring for enhanced performance and proper sealing. It offers excellent uniform porosity and a long filtration life. It also comes in a 10 pack. -
Our PEEK Micro-Metering Valve assembly is designed for the control of fluid flow rates. These needle valves are ideally used with peristaltic pumps, pump fluid-transfer, mass spectometry and fraction collection. It includes (2) F-120 Fingertight Fittings. It is also available without fittings. -
Our PEEK Micro-Metering Valve assembly is designed for the control of fluid flow rates. These needle valves are ideally used with peristaltic pumps, pump fluid-transfer, mass spectometry and fraction collection. is for 1/16"OD tubing. It includes (2) P-230 Flangeless Fittings. It is also available without Fittings. -
Our PEEK Micro-Metering Valve assembly is designed for the control of fluid flow rates. These needle valves are ideally used with peristaltic pumps, pump fluid-transfer, mass spectometry and fraction collection. It includes (2) F-120 Fingertight Fittings. It is also available without fittings.
-
Our PEEK Micro-Metering Valve assembly is designed for the control of fluid flow rates. These needle valves are ideally used with peristaltic pumps, pump fluid-transfer, mass spectometry and fraction collection. It includes (2)OD x P-330 Flangeless Fittings. -
Micro Static Mixing Tee has a unique design where it's internal geometry allows for two fluid streams to combine into one. It has a .5µm PEEK polymer frit that assists in mixing. It is for 1/16"OD Tubing. It includes (3) F-132/P-416 . The M-540A comes w/o a Frit. -
Micro Static Mixing Tee has a unique design where it's internal geometry allows for two fluid streams to combine into one. It has a .5µm PEEK polymer frit that assists in mixing. It is for 1/16"OD Tubing. It includes (3) F-132/P-416 . The M-540A comes w/o a Frit.
-
Our Standard Micro-Splitter Valve has 1/4-28 Flat-Bottom thread capacity. This IDEX Health and Science Micro-Splitter Valve is designed to precisely split and control a low flow stream off a single incoming supply. It is made for interfacing LC-MS systems. This assembly includes (3)OD x P-235 Flangeless Fittings. -
Our Micro-Volume Inline Check Valve is biocompatible and delivers a low cracking pressure. It is made from PEEK and Perfluoroelastomer giving it excellent chemical resistance. Metal free composition makes this check valve perfect for use with corrosive fluids and biological samples. It offers a low swept volume. It has a female to female 10-32 thread port configuration and a .010 thru hole. -
Our High Flow Micro-Volume BPR Assembly was developed to specifically minimize swept volume which is extremely important for multi-detector applications. Our BPR Assembly has a maximum swept volume of only 6uL making it nearly impossible to detect as part of your fluidic pathway. It is for a 1/16 tubing OD and has a pressure setting of 500psi (34 bar) It comes with (1)OD x P-230 Flangeless Fitting. -
Our Low Flow Micro-Volume BPR Assembly was developed to specifically minimize swept volume which is extremely important for multi-detector applications. Our BPR Assembly has a maximum swept volume of only 6uL making it nearly impossible to detect as part of your fluidic pathway. It is for a 1/16 tubing OD and has a pressure setting of 500psi (34 bar) It comes with (1) P-230 Flangeless Fitting. -
Our Low Flow Micro-Volume BPR Assembly was developed to specifically minimize swept volume which is extremely important for multi-detector applications. Our BPR Assembly has a maximum swept volume of only 6uL making it nearly impossible to detect as part of your fluidic pathway. It is for a 1/16 tubing OD and has a pressure setting of 100psi (7 bar) It comes with (1) P-230 Flangeless Fitting. -
Our Biocompatible, MicroCross is used to effectively join 1/16" capillary tubing together. It is made from inert PEEK, which is ideal for chemical resistance. Our MicroTee is specifically designed with a 0.006" thruhole that delivers a low swept volume. It has a .025 tubing OD. It includes (4)F-172 (4) P-416. Brochure -
Our VHP MicroCross Assembly's unique design creates a direct connection for tubing; no sleeves required. It is manufactured from durable stainless steel and features a small thru-hole and very low internal volume. Stainless steel delivers excellent chemical compatibility and conductivity making it an ideal choice when electrical applications are in use. It is for 360µm OD tubing and has a thread of 5/16-24 Coned. It comes with (4) PK-152 and (4)P-416BLK Fittings. Brochure -
Our Biocompatible, MicroTee is used to effectively join 1/16" capillary tubing together. It is specifically designed with a 0.006" thruhole that delivers a low swept volume. It is made from inert PEEK, which is ideal for chemical resistance. It includes (4) F-132 and (4) P-416 Fittings. Brochure -
Our Biocompatible, MicroCross is used to effectively join 1/32" capillary tubing together. It is specifically designed with a 0.006" thruhole that delivers a low swept volume. It is made from inert PEEK, which is ideal for chemical resistance. It includes (4) F-112 and (4) P-416 Fittings. Brochure -
Our Biocompatible, MicroCross is used to effectively join 360um capillary tubing together. It is specifically designed with a 0.006" thruhole that delivers a low swept volume. It is made from inert PEEK, which is ideal for chemical resistance. It includes (4) F-152 and (4) P-416BLK Fittings. Brochure -
Our MicroElbow Assembly is used specifically to connect MicroTight tubing sleeves together. It features a convenient mounting hole for easy placement. It includes (2) F-172 fittings and (2) P-416 Micro-Fingertight Fittings. Brochure -
This MicroFerrule is part of our MicroTight family of fittings. These fittings are designed specifically for Capillary tubing. This naturally colored, PEEK ferrule is for a 1/32"OD. Brochure -
Our Biocompatible, MicroTee is used to effectively join 1/16" capillary tubing together. It is made from inert PEEK, which is ideal for chemical resistance. Our MicroTee is specifically designed with a 0.006" thruhole that delivers a low swept volume. It has a .025 tubing OD. It includes(3) F-172 (3) P-416. Brochure -
Our Biocompatible, MicroTee is designed to join MicroTight tubing sleeves together and delivers a low swept volume. It is made from inert PEEK, which is ideal for chemical resistance. It features a convenient mounting hole for easy placement. It includes (3) F-172 and (3) P-416 Fittings. Brochure -
Our Biocompatible, MicroTee is used to effectively join 1/16" capillary tubing together. It is specifically designed with a 0.006" thruhole that delivers a low swept volume. It is made from inert PEEK, which is ideal for chemical resistance. It includes (3) F-132 and (3) P-416 Fittings. Brochure
