-
Our Vespel Rotor Seal is a polymeric disc that ensures a high pressure seal against the stator. Vespel offers high heat resistance, reliable mechanical strength and broad chemical resistance. It is for valve model 7060L. -
Our Vespel Rotor Seal is a polymeric disc that ensures a high pressure seal against the stator. Vespel offers high heat resistance, reliable mechanical strength and broad chemical resistance. It is for valve models 7125 and 7725. -
Our Vespel Rotor Seal is a polymeric disc that ensures a high pressure seal against the stator. Vespel offers high heat resistance, reliable mechanical strength and broad chemical resistance. It is for valve model 8125. -
Our PEEK VHP (Very High Pressure) Female Nut is for use with a microferrules. It is manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200° C) and higher pressures. It has a 5/16-28 coned port geometry. This Female nut for microferrules comes in natural, black and green. Brochure -
Our PEEK VHP (Very High Pressure) Female Nut is for use with a microferrules. It is manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200° C) and higher pressures. It has a 5/16-28 coned port geometry. This Female nut for microferrules comes in natural, black and green. Brochure -
Very High Pressure (VHP) Reusable Fittings offer an innovative design that can withstand the most extreme pressures. Our ground-breaking VHP fittings are capable of up to 10 repeat assembly cycles with no impact on pressure holding ability or carry-over. VHP Fittings are an ideal choice for today's high performance analytical systems. It has a 10-32 Coned thread port configuration and is for 1/16" OD Tubing. Brochure -
Our Very High Pressure (VHP) LiteTouch Ferrule is manufactured from a proprietary PEEK blend (PK) which allows it to be used at significantly higher temperatures (up to 200°C). This material's characteristics allow the ferrule to operate at much higher pressures than conventional PEEK. Our LiteTouch design is ideally suited for tubing assemblies for coned ports. The mechanical design of the ferrule effectively prevents tubes from twisting. This ferrule is for a 1/16"OD tubing. It is also available in a 10 pack. Brochure -
Our Very High Pressure (VHP) LiteTouch Ferrule is manufactured from a proprietary PEEK blend (PK) which allows it to be used at significantly higher temperatures (up to 200°C). This material's characteristics allow the ferrule to operate at much higher pressures than conventional PEEK. Our LiteTouch design is ideally suited for tubing assemblies for coned ports. The mechanical design of the ferrule effectively prevents tubes from twisting. This ferrule is for a 1/32"OD tubing. It is also available in a 10 pack. Brochure -
Our Very High Pressure (VHP) LiteTouch Nut is manufactured from a proprietary PEEK blend (PK) which allows it to be used at significantly higher temperatures (up to 200°C). Our PK material's characteristics allow the nut to operate at much higher pressures than conventional PEEK. Our LiteTouch design is ideally suited for tubing assemblies for coned ports. This nut is for a 1/16"OD tubing. It is also available in a 10 pack. Brochure -
Our new very high pressure Micro Adapting Tee allow you to connect 1/16" OD tubing to 360 tubing at a right angle. It is made from stainless steel and our PK material giving it high pressure capabilities. Brochure -
Our VHP MicroCross Assembly's unique design creates a direct connection for tubing; no sleeves required. It is manufactured from durable stainless steel and features a small thru-hole and very low internal volume. Stainless steel delivers excellent chemical compatibility and conductivity making it an ideal choice when electrical applications are in use. It is for 1/32"OD tubing and has a thread of 5/16-24 Coned. It comes with (4) PK-112 and (4)P-416 Fittings. Brochure -
VHP MicroFerrules are made from a proprietary high performance PEEK polymer blend (PK). Our PK material's characteristics allows our MicroFerrule to operate at much higher pressures than conventional PEEK. Our unique PK blend offers the unique ability to enable the use of capillary tubing in UHPLC environments. This microferrule has a 1/32OD tubing and is also available in a 10 pack. Brochure
