-
Female LuerTight Fitting Systems reliably holds your fluoropolymer tubing in place while giving the convenience of a luer connection. Our system's streamline design allows for an easy and quick disconnect and no need for barbs. This Systems is for 1/8" OD tubing and includes one ferrule. It can be used with Set Plug P-830T. Brochure -
Our Shut Off Valve Assembly is designed to quickly stops the flow of a stream. The body of the assembly is made from biocompatible Tefzel (ETFE) and features a PCTFE rotor making it highly resistant to chemical attack. P-270 includes (2)P-335 Flangeless Fittings and (2) P-300N Flangeless Ferrules. The P-721A comes without fittings. -
Our Shut Off Valve Assembly is designed to quickly stops the flow of a stream. The body of the assembly is made from biocompatible Tefzel (ETFE) and features a PCTFE rotor making it highly resistant to chemical attack. P-270 includes (2)P-335 Flangeless Fittings and (2) P-300N Flangeless Ferrules. The P-721A comes without fittings. -
Our Shut-Off Valve Assembly is designed to quickly stops the flow of a stream. The body of the assembly is made from solvent resistant Tefzel (ETFE) and features a PCTFE rotor making it highly resistant to chemical attack. It includes (2)OD x P-335 1/16" Flangeless Fittings. It comes in blue. -
Our Shut-Off Valve Assembly is designed to quickly stops the flow of a stream. The body of the assembly is made from solvent resistant Tefzel (ETFE) and features a PEEK rotor making it highly resistant to chemical attack. Our Shut-Off Valve Assembly includes (2)OD x P-335 1/8" Flangeless Fittings. It comes in blue. -
Our Single Mode Analytic Valve is designed our unique Make-Before-Break (MBB(r)) architecture. Manufactured from biocompatible PEEK it has excellent chemical resistance. Our valve has 2 positions and 6 ports. It has a 20 µL Loop with a Position Sensor. -
Our Slurry Packing Adapter is designed to allow for easy slurry packing for microbore guard column hardware. -
The Biotech Solvent Recycler is a completely stand-alone device with an integrated display to show current input and settings, and control keys to easily set its operational parameters. It is typically externally powered via 5V DC, but can also be powered and programmed via a USB connected computer running a terminal software application. The Biotech Solvent Recycler can reduce the mobile phase in isocratic HPLC for up to 90% by redirecting uncontaminated mobile phase into the container. The level of the input signal and setting parameters are displayed on a well-read four-digit LCD display. Valve position and the current display mode are indicated by LEDs placed next to the display. Instrument functions are operated via a membrane keyboard with six keys. Setting of operating parameters and online device activity tracking can also be performed from a PC using any terminal application. Its analog input accepts unipolar and bipolar signals in ranges of ± 1V or ±100 mV alternatively. Analog-to-digital converter provides data for further processing in embedded microcontroller. TTL (contact closure) input is used for the auto-zero function. This model has a PEEK solvent flow path, but the Biotech Solvent Recycler is also available with wetted material in PTFE. -
The Biotech Solvent Recycler is a completely stand-alone device with an integrated display to show current input and settings, and control keys to easily set its operational parameters. It is typically externally powered via 5V DC, but can also be powered and programmed via a USB connected computer running a terminal software application. The Biotech Solvent Recycler can reduce the mobile phase in isocratic HPLC for up to 90% by redirecting uncontaminated mobile phase into the container. The level of the input signal and setting parameters are displayed on a well-read four-digit LCD display. Valve position and the current display mode are indicated by LEDs placed next to the display. Instrument functions are operated via a membrane keyboard with six keys. Setting of operating parameters and online device activity tracking can also be performed from a PC using any terminal application. Its analog input accepts unipolar and bipolar signals in ranges of ± 1V or ±100 mV alternatively. Analog-to-digital converter provides data for further processing in embedded microcontroller. TTL (contact closure) input is used for the auto-zero function. This model has a PTFE solvent flow path, but the Biotech Solvent Recycler is also available with wetted material in PEEK.
-
The SmartSaver™ solvent recycler from Biotech Fluidics saves up to 90% of mobile phase by redirection of the pure solvent to the solvent reservoir during the isocratic HPLC. Can be used with almost all manufacturers equipment and detectors as UV, fluorescens etc. SmartSaver™ brings quite new approach to solvent recycler design. Very compact instrument is powered directly from chromatography data system PC, no power adapter is required. User friendly software is provided to configure the parameters, and to perform on-line monitoring/audit trail. Analog input allows unipolar or bipolar operation within range of ± 1V. TTL/contact closure can be configured as start, auto-zero or valve position control input. This model has a PEEK solvent flow path, but the SmartSaver™ is also available with wetted material in PTFE. -
The SmartSaver™ solvent recycler from Biotech Fluidics saves up to 90% of mobile phase by redirection of the pure solvent to the solvent reservoir during the isocratic HPLC. Can be used with almost all manufacturers equipment and detectors as UV, fluorescens etc. SmartSaver™ brings quite new approach to solvent recycler design. Very compact instrument is powered directly from chromatography data system PC, no power adapter is required. User friendly software is provided to configure the parameters, and to perform on-line monitoring/audit trail. Analog input allows unipolar or bipolar operation within range of ± 1V. TTL/contact closure can be configured as start, auto-zero or valve position control input. This model has a PTFE solvent flow path, but the SmartSaver™ is also available with wetted material in PEEK.
-
Our Inlet Solvent Filter is made from inert, biocompatible UHMWPE. This solvent filter allow you to pass tubing through to the bottom of the filter cup which enables the filter the to efficiently withdraw solvent from within 0.10 inches of the bottom of the solvent bottle. Filter Cups with a porosity of 10µm for Filters A-426, A-445, A-446 & A-447. They also come as a single or in a 5 pack.
-
Our Stainless Steel Frit is designed specifically to work well throughout HPLC systems. We design these frits to deliver excellent uniform porosity and a long filtration life. It has a porosity of .5µm. These Frits are available in a 10 pack. -
Patented, Stainless Steel Bottom-of-the-Bottle Filter Assemblies have an enhanced design that draws solvent from within 1/8" of the bottom of the bottle. It includes convenient, inexpensive replaceable filter cups making it an economical choice. It has a porosity of 10µm and is for 1/8" OD tubing. Out assembly comes with a stainless steel filter cup (A-520) and (1) XP-130 Flangeless Fitting. -
Patented, Stainless Steel Bottom-of-the-Bottle Filter Assemblies have an enhanced design that draws solvent from within 1/8" of the bottom of the bottle. It includes convenient, inexpensive replaceable filter cups making it an economical choice. It has a porosity of 2µm and is for 1/8" OD tubing. Our assembly comes with a stainless steel filter cup (A-522) and (1) XP-130 Flangeless Fitting. -
Our Stainless Steel BPR Holder is mechanically designed to work with any of our BPR cartridges. It is specifically surface-treated to prevent galling, a potential problem with large, threaded material. Our holder has a swept volume of 4µL and comes with (2) F-300 Fittings. -
Our Stainless Steel Bulkhead Union Assembly are precision machined from 316 stainless steel. Our mechanically strong and reliable union offers true zero dead volume (ZDV) allowing tubing to be joined without interrupting the fluidic path. The bulkhead union is manufactured for easily plumbing tubing through equipment housing. It is designed for 1/16"OD tubing, thru-hole of .010 and has a 10-32 Coned thread port configuration. -
Our Stainless Steel Bulkhead Union Assembly are precision machined from 316 stainless steel. Our mechanically strong and reliable union offers true zero dead volume (ZDV) allowing tubing to be joined without interrupting the fluidic path. The bulkhead union is manufactured for easily plumbing tubing through equipment housing. It is designed for 1/16"OD tubing, thru-hole of .020 and has a 10-32 Coned thread port configuration. -
Our Stainless Steel Bulkhead Union Assembly are precision machined from 316 stainless steel. Our mechanically strong and reliable union offers true zero dead volume (ZDV) allowing tubing to be joined without interrupting the fluidic path. The bulkhead union is manufactured for easily plumbing tubing through equipment housing. It is designed for 1/16"OD tubing, thru-hole of .050 and has a 10-32 Coned thread port configuration. -
Our Conductive NanoFilter Capsule is specifically designed for use with the M-534 Conductive Mini MicroFilter Assembly. It encapsulated filters boasts internal volumes as low as 85nL with the micro-screen and 10nL with the frit disc option. It includes a stainless steel Frit. -
Our Conductive NanoFilter Capsule is specifically designed for use with the M-534 Conductive Mini MicroFilter Assembly. It encapsulated filters boasts internal volumes as low as 85nL with the micro-screen and 10nL with the frit disc option. It includes a stainless steel Frit.
-
Our durable Stainless Steel Male Cross Assembly offers consistent and reliable strength. It is designed to join tubing together and it delivers consistent high pressure ratings of 20,000 psi. It's It is for 1/16"OD Tubing and is compatible with any 10-32 coned threaded fitting. This assembly comes with (3)U-400/401 stainless steel fittings. -
Our durable Stainless Steel Male Cross Assembly offers consistent and reliable strength. It is designed to join tubing together and it delivers consistent high pressure ratings of 20,000 psi. It's It is for 1/16"OD Tubing and is compatible with any 10-32 coned threaded fitting. This assembly comes with (3)U-400/401 stainless steel fittings. -
Our Stainless Steel Ferrule delivers strength and reliability. It can withstand pressures of up to 20,000psi when wrench tightened with a nut. Our nut has a 1/4-28 coned thread port configuration and is for 1/8" OD tubing.
