-
Our Tefzel (ETFE) Plugs are specifically used to close off unused ports in valves and multi-port connectors. It is for M6 Flat-Bottom port configuration. It comes in black and natural color. Brochure -
This Polymer Tubing cutter will provide a clean, burr free, 90 degree cut for your 3/16" or 5/16"OD tubing. This polymer tubing cutter provides the most accurate cut which enables leak free HPLC connection. -
Our Stainless Steel Precolumn Filter is ideal for higher pressure applications and to help prevent particulate contamination. It has a porosity .5µm comes with the replaceable Frit A-102. -
Our Stainless Steel Precolumn Filter is ideal for higher pressure applications and to help prevent particulate contamination. It has a porosity .5µm and a swept volume of 84uL and comes with the replaceable Frit A-102. -
Our Stainless Steel Precolumn Filter Assembly is ideal for higher pressure applications to help prevent particulate contamination. It has a porosity of 2µm comes with the replaceable Frit A-101. -
Our Precolumn MircoFilter w/PEEK frit connects directly into microbore or analytical columns. The void volume used is the design of this MicroFilter eliminates mixing of samples in the mobile phase. It is designed for 1/16" tubing OD. This assembly includes (5) A-735, (1) F-132, (1) P-416. The M-560-1 comes with one PEEK frit ( A-735). -
Our Precolumn MircoFilter w/PEEK frit connects directly into microbore or analytical columns. The void volume used is the design of this MicroFilter eliminates mixing of samples in the mobile phase. It is designed for 1/16" tubing OD. This assembly includes (5) A-735, (1) F-132, (1) P-416. The M-560-1 comes with one PEEK frit ( A-735).
-
Our Precolumn MiroFilter effectively connects directly into microbore or analytical columns. The unique void volume used is the design of this MicroFilter eliminates mixing of samples in the mobile phase. It is for a 1/16" tubing OD. This assembly includes (5) C-425, (1) F-172, (1) P-416. It is also comes with one stainless steel frit (C-425).
-
Our Precolumn MiroFilter w/PEEK Frit connects directly into microbore or analytical columns. The void volume used is the design of this MicroFilter eliminates mixing of samples in the mobile phase. This assembly includes (5) A-735, (1) F-172, (1) P-416. -
This Precolumn MiroFilter w/stainless steel frit accurately connects directly into microbore or analytical columns. The total theoretical void volume and PEEK tubing used for this assembly virtually eliminates mixing of samples in the mobile phase. It has a porosity of 0.5µm. This assembly includes (5) C-425, (1) F-172, (1) P-416.
-
Our Precolumn MicroFilters have a 10-32 standard male thread for effectively connecting directly into your Microbore or Analytical column. The void volume used is the design of this MicroFilter eliminates mixing of samples in the mobile phase. It is for 1/16 OD tubing and comes with (1) C-420 stainless steel Frit. -
Our biocompatible Precolumn Filter offers outstanding column protection. The body of this filter is make from PEEK giving it excellent chemical resistance. It has a porosity of .5µm and comes with (1) A-701 Frit. -
Our biocompatible Precolumn Filter offers outstanding column protection. The body of this filter is make from PEEK giving it excellent chemical resistance. It has a porosity of 2µm and comes with (1) A-700 Frit. -
Our Pressure Relief Valve Assembly specifically prevents system over-pressurization. It offers consistent protection to system components by diverting fluid flow automatically when inline pressure exceeds the set limit. Our assembly has a pressure setting of 100psi (7 bar) and is for 1/16"OD tubing. It comes with (1)OD x P-201 Flangeless Fitting and wrenches for tightening. -
Our Pressure Gauge Tee helps has solved the problem of adapting 1/16" tubing to 1/4" National Pipe Thread ports. It is complete with nuts and ferrules for 1/16" OD tubing (2) U-400/401. -
Our Pressure Relief Valve Assembly specifically prevents system over-pressurization. It offers consistent protection to system components by diverting fluid flow automatically when inline pressure exceeds the set limit. Our assembly has a pressure setting of 5psi (0.3 bar) and is for 1/16"OD tubing. It comes with (1)OD x P-201 Flangeless Fitting. -
Our Pressure Relief Valves are ideal for preventing system over-pressurization. This Pressure Relief assembly diverts fluids automatically when inline pressure exceeds set limits. The P-612 Pressure Relief "T" Assembly is for 1/16" Tubing OD. This Assembly comes with a P-201 Flangeless Fitting. It also is available for 3/16" Tubing OD. -
Our Quick-Stop Luer Check Valve is specifically designed to provide inline luer connect/disconnect convenience while avoiding spills. It offers Check Valve protection with Luer convenience. It is made from biocompatible PEEK with gold-plated stainless steel spring. -
Our Quick-Stop Luer Check Valve Assembly is specifically designed to provide inline luer connect/disconnect convenience while avoiding spills. It offers Check Valve protection with Luer convenience. It is made from biocompatible PEEK with gold-plated stainless steel spring Check Valve includes (1) P-697 Quick-Stop Luer Check Valve and (1) P-655 Adapter. -
Our Capillary Sample Trap Columns are ideal for separating and concentrating and/or purifying biological samples for mass spectrometer analysis. This assembly comes equipped with a NanoFilter Capsule and a Titanium Frit. -
This PEEK Sample Trap Column Coupler is specifically created to connect two or more Capillary Sample Trap Columns in sequence. Our PEEK material offers excellent chemical resistance. Our Sample Trap Columns are ideal for separating and concentrating and/or purifying biological samples for mass spectrometer analysis. -
Our SealTight Flangeless Nut design makes high pressure flat-bottom 1/16" OD tubing connections possible. It's unique design minimizes tubing twists and typically is tightened only 1/4 turn past the point of initial compression. It has a 1/4-28 Flat-Bottom port configuration and is for 1/16" OD tubing. It is short in length and comes in black. Brochure -
This SealTight Ferrule was created for the 2-Piece SealTight Fingertight Fittings. It has a slotted end which creates a second compression zone. The forward cone on the ferrule provides outstanding gripping power and a leak-free seal. It comes as a single or in a 10 pack. Brochure -
This SealTight Ferrule was created for the 2-Piece SealTight Fingertight Fittings. It has a slotted end which creates a second compression zone. The forward cone on the ferrule provides outstanding gripping power and a leak-free seal. It comes as a single or in a 10 pack. Brochure
-
This PEEK, Short, Hex-head Two-Piece SealTight Fingertight Fitting is designed so that the nut and ferrule create dual compression. The forward cone on the ferrule provides outstanding gripping power and a leak-free seal. Manufactured for biocompatible PEEK it offers excellent chemical resistance. It comes in black, has a 10-32 port configuration, is for 1/16"OD tubing and comes with Ferrule F-192. Brochure -
This PEEK Short, Two-Piece SealTight Fingertight Fitting is optimally designed so that the nut and ferrule create dual compression. The forward cone on the ferrule provides outstanding gripping power and a leak-free seal. Manufactured from biocompatible PEEK it offers excellent chemical resistance. It is black, has a 10-32 Coned port configuration is designed to connect to 1/16"OD tubing. This assembly comes with Ferrule F-192 and is available as a single set or a 10 pack. Brochure -
This PEEK Short, Two-Piece SealTight Fingertight Fitting is optimally designed so that the nut and ferrule create dual compression. The forward cone on the ferrule provides outstanding gripping power and a leak-free seal. Manufactured from biocompatible PEEK it offers excellent chemical resistance. It is black, has a 10-32 Coned port configuration is designed to connect to 1/16"OD tubing. This assembly comes with Ferrule F-192 and is available as a single set or a 10 pack. Brochure -
This PEEK Long, Two-Piece SealTight Fingertight Fitting is optimally designed so that the nut and ferrule create dual compression. The forward cone on the ferrule provides outstanding gripping power and a leak-free seal. Manufactured from biocompatible PEEK it offers excellent chemical resistance. It is black, has a 10-32 Coned port configuration is designed to connect to 1/16"OD tubing. This assembly comes with Ferrule F-192 and is available as a single set or a 10 pack. Brochure -
Our Two-Piece SealTight Fingertight Fitting is designed so that the nut and ferrule create dual compression. The forward cone on the ferrule provides outstanding gripping power and a leak-free seal. Manufactured for biocompatible PEEK it offers excellent chemical resistance. It has a 10-32 port configuration, is for 1/16"OD tubing and comes with Ferrule F-192. It comes in black. Brochure -
Our SealTight Two-Piece Fingertight Fitting is designed so that the nut and ferrule create dual compression. The forward cone on the ferrule provides outstanding gripping power and a leak-free seal. Flush Nuts offers the answer for those tight-space applications where nut heads often interfere with each other. Manufactured from durable and strong stainless steel, it can withstand high pressures. It has a 10-32 port configuration, is for 1/16"OD tubing and comes with Ferrule F-192. Brochure -
Biocompatible Semi-Prep Inline Filters consist of a durable stainless steel body and has a biocompatible, 100% PEEK flow path. Our design makes this filter ideal for higher flow analytical, semi-prep and preparative applications. It has a porosity of 5µm and is for 1/4"OD tubing. -
Biocompatible Semi-Prep Inline Filters consist of a durable stainless steel body and has a biocompatible, 100% PEEK flow path. Our design makes this filter ideal for higher flow analytical, semi-prep and preparative applications. It has a porosity of 5µm and if for 3/16"OD tubing. -
Our Semi-Prep Filter Assembly is uniquely designed for high flow applications. It adds only 50 psi (3 bar) additional back pressure. It has a porosity of 10µm and included stainless steel frit (1) A-331. -
Our Semi-Prep Filter Assembly is meticulously designed for high flow applications. It is SFC and HPLC compatible. It has a porosity of 10µm and includes a stainless steel frit (1) A-331 . -
Our Semi Prep Guard Cartridge Assembly is designed to accompany the C-1000 Semi-Prep Guard Column. This convenient cartridge system is easy to pack and will hold up to high pressure and is carefully treated to prevent galling. -
Our Semi-Prep Unpacked Guard Column Holder offers excellent column protection. This convenient cartridge system is easy to pack and will hold up to high pressure and is carefully treated to prevent galling.
