-
This Inline MicroFilter Assembly is manufactured from durable stainless steel. It protects your column from an array of particles from the sample or mobile stage or from pump seal and sample injection valve wear. It includes (5) M-130 End Fittings. -
This naturally colored Replacement Inline MicroFilter(M-140) End-Fitting comes with a PEEK Frit. It is part of our Inline MicroFilter Assembly. This assembly protects your column from particles produced in the sample phase or from pump seal and sample injection valve wear. This is available in a 10pk. -
This Swaging tool is used to work with TinyTight Fittings. Use this tool by placing in a vice, then tighten tubing, fitting, and ferrule into the tool as you would into any port. Once removed, the swaged ferrule will be held in place on the tubing. -
Our Swaging Tool is specifically for use with 6-32 threads ports. Use this tool by placing in a vice, then tighten tubing, fitting, and ferrule into the tool as you would into any port. Once removed, the swaged ferrule will be held in place on the tubing. -
Our Conductive ferrule is ideal for electrospray applications, try our Conductive Ferrule instead of graphite ferrules. Because of its elastomeric properties, you can reuse this ferrule through many tightening/retightening cycles - unlike most graphite ferrules. It is for 360µm OD tubing. -
Our Super Flangeless Ferrule effectively eliminates loosening of fittings due to tube twisting and holds tight even during vibration. It delivers the highest pressure holding for flat bottom fittings that we offer. It has a 10-32 Coned port configuration and is for 1/16" OD tubing. It comes as a single and in a 10 pack. -
Our Super Flangeless Ferrule effectively eliminates loosening of fittings due to tube twisting and holds tight even during vibration. It delivers the highest pressure holding for flat bottom fittings that we offer. It has a 10-32 Coned port configuration and is for 1/16" OD tubing. It comes as a single and in a 10 pack. -
Our Low Flow Micro-Volume BPR Assembly was developed to specifically minimize swept volume which is extremely important for multi-detector applications. Our BPR Assembly has a maximum swept volume of only 6uL making it nearly impossible to detect as part of your fluidic pathway. It is for a 1/16 tubing OD and has a pressure setting of 100psi (7 bar) It comes with (1) P-230 Flangeless Fitting. -
Our Low Flow Micro-Volume BPR Assembly was developed to specifically minimize swept volume which is extremely important for multi-detector applications. Our BPR Assembly has a maximum swept volume of only 6uL making it nearly impossible to detect as part of your fluidic pathway. It is for a 1/16 tubing OD and has a pressure setting of 500psi (34 bar) It comes with (1) P-230 Flangeless Fitting. -
Our High Flow Micro-Volume BPR Assembly was developed to specifically minimize swept volume which is extremely important for multi-detector applications. Our BPR Assembly has a maximum swept volume of only 6uL making it nearly impossible to detect as part of your fluidic pathway. It is for a 1/16 tubing OD and has a pressure setting of 500psi (34 bar) It comes with (1)OD x P-230 Flangeless Fitting. -
This Precolumn MiroFilter w/stainless steel frit accurately connects directly into microbore or analytical columns. The total theoretical void volume and PEEK tubing used for this assembly virtually eliminates mixing of samples in the mobile phase. It has a porosity of 0.5µm. This assembly includes (5) C-425, (1) F-172, (1) P-416. -
Our Precolumn MiroFilter w/PEEK Frit connects directly into microbore or analytical columns. The void volume used is the design of this MicroFilter eliminates mixing of samples in the mobile phase. This assembly includes (5) A-735, (1) F-172, (1) P-416.
