-
Designed to Bridge between Rigid-Walled Tubing and Soft-Walled Tubing. Supplied in 2-pack. For use with 2.55-3.80 mm ID Peristaltic Tubing with an OD up to 6.4 mm. Our Peristaltic Tubing Adapter Sets facilitate a secure connection between soft-walled, peristaltic tubing and more traditional, rigid-walled tubing. Through the use of a ribbed nose that fits securely inside the soft-walled tubing and a retainer sleeve that slips over the soft-walled tubing, this adapter firmly holds peristaltic tubing in place, while simultaneously allowing more permanent 1/16" OD tubing (e.g., FEP, PEEK, Stainless Steel) to be joined on the other end through the use of the Flangeless Fittings (included). These 2-pack sets allows you to make your own stoppered tubing assembly for use with some peristaltic pumps, while also minimizing the amount of soft-walled tubing that must be used in the fluid pathway. These adapters can be used with soft-walled tubing with a variety of inner diameters and outer diameters, as indicated. Brochure -
Our special MicroTight Adapters were created specifically to facilitate connecting fused silica and other capillary tubing to standard 1/16"OD tubing or standard luer-lock connectors. It is manufactured from biocompatible PEEK who's distinct material delivers excellent chemical resistance. Includes (1)1 F-120, (1) F-125, (1) P-554. Brochure -
Our MicroTight Unions Assembly is used specifically to easily connect capillary tubing together. True ZDV (Zero Dead Volume) allows two pieces of tubing to connect directly to each other using the included gauge and plug to ensure proper alignment. This allows for an uninterrupted fluidic path. It is for use with 1/32OD Tubing and includes (2) F-126S Fittings and (1) P-553 Gauge. Brochure -
Our MicroTight Union Assembly is used specifically to connect capillary tubing together. It features a 0.015" thru-hole which adds only a small amount of additional flow-path volume to help ensure proper chromatographic results. It has a 360umOD and includes (2) F-152 fittings and (2) P-416BLK Micro-Fingertight Fittings. Brochure -
Our Biocompatible, MicroTee is used to effectively join 1/16" capillary tubing together. It is made from inert PEEK, which is ideal for chemical resistance. Our MicroTee is specifically designed with a 0.006" thruhole that delivers a low swept volume. It has a .025 tubing OD. It includes(3) F-172 (3) P-416. Brochure -
Our Biocompatible, MicroCross is used to effectively join 1/16" capillary tubing together. It is made from inert PEEK, which is ideal for chemical resistance. Our MicroTee is specifically designed with a 0.006" thruhole that delivers a low swept volume. It has a .025 tubing OD. It includes (4)F-172 (4) P-416. Brochure -
Our NanoTight Union has an enhanced internal design that greatly reduces the incidence of tubing misalignment. It's webbed thru-hole prevents the breaking of fused silica and produces minimal swept volume which results in fewer blockages, fewer rate reductions and fewer back pressure problems. It comes with (2)F-331N fittings. Brochure -
Our Shut-Off Valve Assembly is designed to quickly stops the flow of a stream. The body of the assembly is made from solvent resistant Tefzel (ETFE) and features a PCTFE rotor making it highly resistant to chemical attack. It includes (2)OD x P-335 1/16" Flangeless Fittings. It comes in blue. -
Our Shut-Off Valve Assembly is designed to quickly stops the flow of a stream. The body of the assembly is made from solvent resistant Tefzel (ETFE) and features a PCTFE rotor making it highly resistant to chemical attack. Our Shut-Off Valve Assembly includes (2)OD x P-335 1/8" Flangeless Fittings. It comes in blue. -
Our Biocompatible Back Pressure Regulator (BPR) Assembly offers proven outgassing protection and enhances system performance. It optimally delivers incremental back pressure of 40 psi (2.8 bar). Our BPR assembly includes (1) P-761 BPR Cartridge and (2)OD x P-215 Flangeless Fittings. -
Our Biocompatible Back Pressure Regulator (BPR) Assembly offers proven outgassing protection and enhances system performance. It optimally delivers incremental back pressure of 75 psi (5.2 bar). Our BPR assembly includes (1) P-762 BPR Cartridge and (2)OD x P-215 Flangeless Fittings.
