-
Our Biocompatible Back Pressure Regulator (BPR) Assembly offers proven outgassing protection and enhances system performance. It optimally delivers incremental back pressure of 250 psi (17 bar). Our BPR Assembly includes (1) P-764 BPR Cartridge and (2)OD x P-235 Flangeless Fittings. -
Our Biocompatible Back Pressure Regulator (BPR) Assembly offers proven outgassing protection and enhances system performance. It optimally delivers incremental back pressure of 500 psi (34 bar). This BPR Assembly includes (1) P-765 BPR Cartridge (2) P-250 Ferrules and (2) LT-115 Nuts. -
Our Biocompatible Back Pressure Regulator (BPR) Assembly offers proven outgassing protection and enhances system performance. It optimally delivers incremental back pressure of 5 psi (0.3 bar). This BPR Assembly includes (2) x P-215 Flangeless Fittings including ferrules. NOTE: This special pre-set back pressure regulator assembly is available as an assembly ONLY – replacement cartridges are NOT available separately. CAUTION: Do not wrench tighten or loosen the back pressure regulator assembly. Doing so will void the preset pressure calibration. -
Our Biocompatible Back Pressure Regulator (BPR) Assembly offers proven outgassing protection and enhances system performance. It optimally delivers incremental back pressure of 20 psi (1.4 bar). This BPR Assembly includes (2) x P-215 Flangeless Fittings including ferrules. NOTE: This special pre-set back pressure regulator assembly is available as an assembly ONLY – replacement cartridges are NOT available separately. CAUTION: Do not wrench tighten or loosen the back pressure regulator assembly. Doing so will void the preset pressure calibration. -
Our Conical Adapter Assemblies facilitate the connection of rigid and semi-rigid walled tubing to soft-walled peristaltic tubing with a variety of inner diameters. The unique design of this adapter incorporates a two-stage nose onto which soft-walled tubing can be pressed, and the rigid-walled tubing is connected to the other end of the adapter assembly through the use of the included Super Flangeless(tm) fittings. Several options exist in this family, facilitating the connection of either 1/16" OD or 1/8" OD rigid and semi-rigid walled tubing and soft-walled tubing with an inner diameter as large as 1/8" (3.2 mm), as indicated. Brochure -
Our replacement Back Pressure Regulator (BPR) Cartridge operates as an easy to use, replaceable component for our BPR systems. We constructed this cartridge from PEEK, Tefzel (EFTE), PCTFE and included a gold plated stainless steel spring delivering consistent, reliable usage. It is conveniently designed to be used with any of our standard BRP Holders and creates a back pressure of 750 psi (34 bar). It comes with a black body and blue end cap. -
Our Replacement Back Pressure Regulator (BPR) Cartridge operates as an easy to use, replaceable component for our BPR systems. We constructed this cartridge from PEEK, Tefzel (EFTE), PCTFE and included a gold plated stainless steel spring delivering consistent, reliable usage. It is conveniently designed be used with any of our standard BRP Holders and creates a back pressure of 1000 psi (34 bar). It comes with a black body with green end cap. -
Our Conical Adapter Assemblies facilitate the connection of rigid and semi-rigid walled tubing to soft-walled peristaltic tubing with a variety of inner diameters. The unique design of this adapter incorporates a two-stage nose onto which soft-walled tubing can be pressed, and the rigid-walled tubing is connected to the other end of the adapter assembly through the use of the included Super Flangeless(tm) fittings. Several options exist in this family, facilitating the connection of either 1/16" OD or 1/8" OD rigid and semi-rigid walled tubing and soft-walled tubing with an inner diameter as large as 1/8" (3.2 mm), as indicated. Brochure -
Our Conical Adapter Assemblies facilitate the connection of rigid and semi-rigid walled tubing to soft-walled peristaltic tubing with a variety of inner diameters. The unique design of this adapter incorporates a two-stage nose onto which soft-walled tubing can be pressed, and the rigid-walled tubing is connected to the other end of the adapter assembly through the use of the included Super Flangeless(tm) fittings. Several options exist in this family, facilitating the connection of either 1/16" OD or 1/8" OD rigid and semi-rigid walled tubing and soft-walled tubing with an inner diameter as large as 1/8" (3.2 mm), as indicated. Brochure -
Our Conical Adapter Assemblies facilitate the connection of rigid and semi-rigid walled tubing to soft-walled peristaltic tubing with a variety of inner diameters. The unique design of this adapter incorporates a two-stage nose onto which soft-walled tubing can be pressed, and the rigid-walled tubing is connected to the other end of the adapter assembly through the use of the included Super Flangeless(tm) fittings. Several options exist in this family, facilitating the connection of either 1/16" OD or 1/8" OD rigid and semi-rigid walled tubing and soft-walled tubing with an inner diameter as large as 1/8" (3.2 mm), as indicated. Brochure -
Our PEEK Low Pressure Tee Assembly is strong and durable handling a pressure rating 500 psi . It has excellent chemical resistance to commonly used solvents. Our assembly comes equipped with conveniently placed mounting holes. This assembly comes complete with (3) P-335 Nuts. Brochure -
Our Barbed Unions have been engineered to effectively join two pieces of soft-walled tubing together. This type of connector is typically the connector of choice for joining two peristaltic tubes with similar inner diameters together. Our unions are manufactured from either polypropylene or nylon and are packaged either individually or as 10-packs (as indicated). Brochure
