-
Our 3 Way Analytic Valve is ideal for applications that involve low frequency of use and demands operator control. It is manufactured from durable stainless steel Vespel(r) giving excellent mechanical strength. It has 2-positions and 6-ports. -
Our 3 Way Semi-Prep Valve is ideal for applications that involve low frequency of use and demands operator control. It is manufactured from durable stainless steel and mechanically strong Vespel(r). It is for large bore passageways. It has 2-positions and 6-ports.
-
Our 4 Way PEEK Bulkhead Flow Valve is ideal if your application involves low frequency of use and demands operator control or involves injection of smaller sample volumes. Manufactured from biocompatible PEEK, it offers excellent chemical resistance. It has 1/4-28 ports and is for 1/16" OD tubing. It is available is diagonal flow, right angle "L" flow and Single "T" flow. -
Our 4 Way PEEK Bulkhead Flow Valve is ideal if your application involves low frequency of use and demands operator control or involves injection of smaller sample volumes. Manufactured from biocompatible PEEK, it offers excellent chemical resistance. It has 1/4-28 ports and is for 1/16" OD tubing. It is available is diagonal flow, right angle "L" flow and Single "T" flow. -
Our 4 Way PEEK Bulkhead Flow Valve is ideal if your application involves low frequency of use and demands operator control or involves injection of smaller sample volumes. Manufactured from biocompatible PEEK, it offers excellent chemical resistance. It has 1/4-28 ports and is for 1/16" OD tubing. It is available is diagonal flow, right angle "L" flow and Single "T" flow. -
Our Analytic 600 Bar Syringe Injection Valve is a manual front loading injection. This valve is designed with our unique Make-Before-Break (MBB(r)) architecture. This feature allows continuous flow between LOAD and IN-JECT positions. It is specifically set to 600 bar. It has 2-positions and 6-port. -
Our Front Loading Injection Valve is designed with our unique MBB -Make-Before-Break- architecture. The valve includes a position sensing switch. Sample is loaded through the front of the valve using a syringe. A 20 µL sample loop is connected between ports 1 and 4. It is made from durable Stainless Steel. It has 2-positions and 6-port. -
Our PEEK Analytic Valve w/Switching Sensor is designed with our unique MBB -Make-Before-Break- architecture. It's PEEK construction offers excellent chemical resistance. Our valve has 2 positions and 6 ports, and it is a dual mode injection valve. -
This Analytic PEEK Valve w/Sensing Switch is a front loading sample injection valve with our unique MBB -Make-Before-Break- architecture. A 20 µL sample loop is connected between ports 1 and 4. Our valve includes a position sensing switch. Sample is loaded through the front of the valve using a syringe. It has 2-positions and 6-ports. -
Our Analytical Scale Rear Loading Injection Valve is designed with our unique MBB -Make-Before-Break- architecture. A 20µL sample loop is connected between ports 1 and 4. It is made from durable Stainless Steel. It has 2-positions and 6-ports.
-
Our Analytical Selector Valve works well if your application involves low frequency of use, demands operation control of several fluidic streams. Made from stainless steel, this valve offers durability. It has 6-positions and 7-ports.
-
Our Analytical Stainless Steel Switching Valve offers strong durability. It is ideal if your application involves low frequency of use and demands operator control. It is analytical scale and has 2-positions and 6-ports. -
BioVersal™ UHPLC sample loops are part of IDEX Health & Sciences bioinert UHPLC product family. These metal-free sample loops are ideal for bioinert UHPLC Applications. Each sample loop is made by utilizing IDEX’s PEEK lined stainless steel manufacturing process. The PEEK lining reinforced by the stainless steel gives these sample loops the strength to withstand pressures up to 1310 bar (131 MPa; 19,000 psi), and makes the sample loop inert to almost all organic solvents. Each sample loop unitizes IDEX’s patented face sealing technology for zero dead volume connections into any port. Two fingertight MarvelX™ fittings are included with the sample loop can be connected and disconnected 100+ times. -
BioVersal™ UHPLC sample loops are part of IDEX Health & Sciences bioinert UHPLC product family. These metal-free sample loops are ideal for bioinert UHPLC Applications. Each sample loop is made by utilizing IDEX’s PEEK lined stainless steel manufacturing process. The PEEK lining reinforced by the stainless steel gives these sample loops the strength to withstand pressures up to 1310 bar (131 MPa; 19,000 psi), and makes the sample loop inert to almost all organic solvents. Each sample loop unitizes IDEX’s patented face sealing technology for zero dead volume connections into any port. Two fingertight MarvelX™ fittings are included with the sample loop can be connected and disconnected 100+ times. -
BioVersal™ UHPLC sample loops are part of IDEX Health & Sciences bioinert UHPLC product family. These metal-free sample loops are ideal for bioinert UHPLC Applications. Each sample loop is made by utilizing IDEX’s PEEK lined stainless steel manufacturing process. The PEEK lining reinforced by the stainless steel gives these sample loops the strength to withstand pressures up to 1310 bar (131 MPa; 19,000 psi), and makes the sample loop inert to almost all organic solvents. Each sample loop unitizes IDEX’s patented face sealing technology for zero dead volume connections into any port. Two fingertight MarvelX™ fittings are included with the sample loop can be connected and disconnected 100+ times. -
BioVersal™ UHPLC sample loops are part of IDEX Health & Sciences bioinert UHPLC product family. These metal-free sample loops are ideal for bioinert UHPLC Applications. Each sample loop is made by utilizing IDEX’s PEEK lined stainless steel manufacturing process. The PEEK lining reinforced by the stainless steel gives these sample loops the strength to withstand pressures up to 1310 bar (131 MPa; 19,000 psi), and makes the sample loop inert to almost all organic solvents. Each sample loop unitizes IDEX’s patented face sealing technology for zero dead volume connections into any port. Two fingertight MarvelX™ fittings are included with the sample loop can be connected and disconnected 100+ times.
-
Our BPR Assembly offers proven outgassing protection which enhances system performance and improves pump check valve efficiency. It includes a biocompatible cartridge and provides a reliable 316 stainless steel holder. It has a pressure setting of 100 psi (7 bar). It comes with (1) P-763 Cartridge and (2)OD x P-201 Flangeless Fittings. -
Our Biocompatible Back Pressure Regulator (BPR) Assembly offers proven outgassing protection and enhances system performance. It optimally delivers incremental back pressure of 100 psi (7 bar). Our BPR assembly includes (1) P-763 BPR Cartridge and (2)OD x P-215 Flangeless Fittings. -
Our Biocompatible Back Pressure Regulator (BPR) Assembly offers proven outgassing protection and enhances system performance. It optimally delivers incremental back pressure of 20 psi (1.4 bar). This BPR Assembly includes (2) x P-215 Flangeless Fittings including ferrules. NOTE: This special pre-set back pressure regulator assembly is available as an assembly ONLY – replacement cartridges are NOT available separately. CAUTION: Do not wrench tighten or loosen the back pressure regulator assembly. Doing so will void the preset pressure calibration. -
Our BPR Assembly offers proven outgassing protection which enhances system performance and improves pump check valve efficiency. It includes a biocompatible cartridge and provides a reliable 316 stainless steel holder. It has a pressure setting of 250 psi (7 bar). It comes with (1) P-764 Cartridge and (2)OD x P-201 Flangeless Fittings. -
Our Biocompatible Back Pressure Regulator (BPR) Assembly offers proven outgassing protection and enhances system performance. It optimally delivers incremental back pressure of 250 psi (17 bar). Our BPR Assembly includes (1) P-764 BPR Cartridge and (2)OD x P-235 Flangeless Fittings. -
Our BPR Assembly offers proven outgassing protection which enhances system performance and improves pump check valve efficiency. It includes a biocompatible cartridge and provides a durable 316 stainless steel holder. It has a pressure setting of 40psi (2.8 bar). It comes with (1) P-761 Cartridge and (2)OD x P-201 Flangeless Fittings. -
Our Biocompatible Back Pressure Regulator (BPR) Assembly offers proven outgassing protection and enhances system performance. It optimally delivers incremental back pressure of 40 psi (2.8 bar). Our BPR assembly includes (1) P-761 BPR Cartridge and (2)OD x P-215 Flangeless Fittings. -
Our Biocompatible Back Pressure Regulator (BPR) Assembly offers proven outgassing protection and enhances system performance. It optimally delivers incremental back pressure of 5 psi (0.3 bar). This BPR Assembly includes (2) x P-215 Flangeless Fittings including ferrules. NOTE: This special pre-set back pressure regulator assembly is available as an assembly ONLY – replacement cartridges are NOT available separately. CAUTION: Do not wrench tighten or loosen the back pressure regulator assembly. Doing so will void the preset pressure calibration. -
Our BPR Assembly offers proven outgassing protection which enhances system performance and improves pump check valve efficiency. It includes a biocompatible cartridge and provides a reliable 316 stainless steel holder. It has a pressure setting of 500 psi (34 bar). It comes with (1) P-765 Cartridge and (2)OD x P-201 Flangeless Fittings. -
Our Biocompatible Back Pressure Regulator (BPR) Assembly offers proven outgassing protection and enhances system performance. It optimally delivers incremental back pressure of 500 psi (34 bar). This BPR Assembly includes (1) P-765 BPR Cartridge (2) P-250 Ferrules and (2) LT-115 Nuts. -
Our BPR Assembly offers proven outgassing protection which enhances system performance and improves pump check valve efficiency. It includes a biocompatible cartridge and provides a reliable 316 stainless steel holder. It has a pressure setting of 75 psi (2.8 bar). It comes with (1) P-762 Cartridge and (2)OD x P-201 Flangeless Fittings. -
Our Biocompatible Back Pressure Regulator (BPR) Assembly offers proven outgassing protection and enhances system performance. It optimally delivers incremental back pressure of 75 psi (5.2 bar). Our BPR assembly includes (1) P-762 BPR Cartridge and (2)OD x P-215 Flangeless Fittings. -
Our BPR Assembly offers proven outgassing protection which enhances system performance and improves pump check valve efficiency. It includes a biocompatible cartridge and provides a reliable 316 stainless steel holder. It has a pressure setting of 750 psi (52 bar). It comes with (1) P-795 Cartridge and (2)OD x P-201 Flangeless Fittings. -
Our biocompatible, PEEK Back Pressure Regulator (BPR) Assembly delivers consistent incremental back pressure. It reliably prevents system over-pressurization or additional inline pressure for more efficient system performance. It has a 1000 psi (69 bar) pressure setting. It comes with (1) P-769, (2) P-250, (2) LT-115. -
Our practical Replacement Back Pressure Regulator (BPR) Cartridge (P-763) operates as an easy to use, replaceable component for our BPR systems. Our Cartridge can conveniently be used with any of our standard BRP Holders and creates a back pressure of 100 psi (7 bar). It is constructed from PEEK, Tefzel (EFTE), PCTFE and has a gold plated stainless steel spring delivering reliable usage. It comes with a tan body and red cap. -
Our Replacement Back Pressure Regulator (BPR) Cartridge operates as an easy to use, replaceable component for our BPR systems. We constructed this cartridge from PEEK, Tefzel (EFTE), PCTFE and included a gold plated stainless steel spring delivering consistent, reliable usage. It is conveniently designed be used with any of our standard BRP Holders and creates a back pressure of 1000 psi (34 bar). It comes with a black body with green end cap. -
Our practical Replacement Back Pressure Regulator (BPR) Cartridge operates as an easy to use, replaceable component for our BPR systems. Our cartridge can easily be used with any of our standard BRP Holders and creates a back pressure of 250 psi (17 bar). It is constructed from PEEK, Tefzel (EFTE), PCTFE and has a gold plated stainless steel spring delivering reliable usage. It comes with a tan body and white cap. -
Our practical Replacement Back Pressure Regulator (BPR) Cartridge operates as an easy to use, replaceable component for our BPR systems. It is constructed from PEEK, Tefzel (EFTE), PCTFE and has a gold plated stainless steel spring delivering reliable usage. Our cartridge can conveniently be used with any of our standard BRP Holders and creates a back pressure of 40 psi (2.8 bar). It comes with a tan body and a blue cap. -
Our practical Replacement Back Pressure Regulator (BPR) Cartridge operates as an easy to use, replaceable component for our BPR systems. It is constructed from PEEK, Tefzel (EFTE), PCTFE and has a gold plated stainless steel spring delivering reliable usage. Our specialized cartridge can be easily used with any of our durable standard BRP Holders and creates a back pressure of 500 psi (34 bar). It comes with a tan body and green cap. -
Our practical Replacement Back Pressure Regulator (BPR) Cartridge (P-762) operates as an easy to use, replaceable component for our BPR systems. It is constructed from PEEK, Tefzel (EFTE), PCTFE and has a gold plated stainless steel spring delivering reliable usage. It can conveniently be used with any of our standard BRP Holders and creates a back pressure of 75 psi (5.2 bar). It has a tan body and yellow end cap.
