-
Our all-PEEK One Piece Super Flangeless Fitting is excellent for those connections that need to be broken frequently and tubing assemblies because they swage onto the tubing. Manufactured from biocompatible PEEK, it offers superior chemical resistance. It has an 1/4-28 Flat-Bottom port configuration and is for 1/16"OD Tubing. Brochure -
Super Flangeless LiteTouch Stainless Steel Nut is strong and durable. It eliminates loosening of fittings due to tube twisting, hold tight even during vibration and delivers the highest pressure holding for flat bottom fittings that we offer. It provides excellent reliable connections that need to be broken frequently and tubing assemblies because they swage onto the tubing. This short Nut is for 1/16" or 1/32" tubing OD and has a thread port configuration of 1/4-28 Flat-Bottom. Brochure -
Our Super Flangeless Fitting system is an ideal choice those connections that need to be broken frequently and tubing assemblies because they swage onto the tubing. The nut is manufactured from biocompatible PEEK and delivers excellent chemical resistance. It comes with a ETFE ferrule and stainless steel locking ring. Our fitting has a 5/16-24 Flat-Bottom thread port configuration and is for 1/16"OD tubing. Our fitting system comes with a P-259 Super Flangeless Ferrule. -
This Swaging tool is used to work with TinyTight Fittings. Use this tool by placing in a vice, then tighten tubing, fitting, and ferrule into the tool as you would into any port. Once removed, the swaged ferrule will be held in place on the tubing. -
Our Swaging Tool is specifically for use with 6-32 threads ports. Use this tool by placing in a vice, then tighten tubing, fitting, and ferrule into the tool as you would into any port. Once removed, the swaged ferrule will be held in place on the tubing. -
Our Swivel Barbed Adapters have been engineered for use with soft-walled tubing and are uniquely designed, made of two captive pieces acting as a one-piece fitting. These 1/4-28 flat-bottom barbed connections spin freely from the nut to prevent twist during installation. Manufactured from polypropylene, these are ideal for use with most aqueous solutions. Options exist for several different tubing inner diameters. -
Our Swivel Barbed Adapters have been engineered for use with soft-walled tubing and are uniquely designed, made of two captive pieces acting as a one-piece fitting. These 1/4-28 flat-bottom barbed connections spin freely from the nut to prevent twist during installation. Manufactured from polypropylene, these are ideal for use with most aqueous solutions. Options exist for several different tubing inner diameters. -
Our Swivel Barbed Adapters have been engineered for use with soft-walled tubing and are uniquely designed, made of two captive pieces acting as a one-piece fitting. These 1/4-28 flat-bottom barbed connections spin freely from the nut to prevent twist during installation. Manufactured from polypropylene, these are ideal for use with most aqueous solutions. Options exist for several different tubing inner diameters. -
Our Degassing Vacuum Control System is designed for simple plug and play operation into most of our degassing chambers. Simply provide 24DC and the system will automatically provide vacuum to the specified vacuum level. Built in continuous head purges ensure that moisture and vapor are swept out of the pump to maintain consistent performance. An optional connector is available for LED error outputs. This all new generation of pumps is characterized of being almost entirely silent - a remarkable upgrade from older versions. It’s also lighter and operates with less vibrations. -
Our Degassing Vacuum Control System is designed for simple plug and play operation into most of our degassing chambers. Simply provide 24DC and the system will automatically provide vacuum to the specified vacuum level. Built in continuous head purges ensure that moisture and vapor are swept out of the pump to maintain consistent performance. An optional connector is available for LED error outputs. This all new generation of pumps is characterized of being almost entirely silent - a remarkable upgrade from older versions. It’s also lighter and operates with less vibrations. Errors Detected: 1 Pumpdown: Prep_Unable to reach 110 mmHg in 10 minutes., Analytical_Unable to reach 80 mmH6 in 10 minutes, 2 High Vacuum: Prep_Vacuum more than 110 mmHg for more than 6 min in the running state (after pump down)., Analytical_Vacuum more than 80 mmHg for more than 6 min in the running state (after pump down)., 3 Sensor Signal: Sensor Failure Detected, sensor signal less than 25 mmHg. LED Indicators or Optional Errors Output: Electrical Output _ 10mA @ 5VDC, Blinking Rate_1 second on, 1 second off, Power on, vacuum above control range: Red blinking, Vacuum reaches upper control range: Green, Solid,Error Condition, Shutdown: Red Solid. -
Our Degassing Vacuum Control System is designed for simple plug and play operation into most of our degassing chambers. Simply provide 24DC and the system will automatically provide vacuum to the specified vacuum level. Built in continuous head purges ensure that moisture and vapor are swept out of the pump to maintain consistent performance. An optional connector is available for LED error outputs. This all new generation of pumps is characterized of being almost entirely silent - a remarkable upgrade from older versions. It’s also lighter and operates with less vibrations. Errors Detected: 1 Pumpdown: Prep_Unable to reach 110 mmHg in 10 minutes., Analytical_Unable to reach 80 mmH6 in 10 minutes, 2 High Vacuum: Prep_Vacuum more than 110 mmHg for more than 6 min in the running state (after pump down)., Analytical_Vacuum more than 80 mmHg for more than 6 min in the running state (after pump down)., 3 Sensor Signal: Sensor Failure Detected, sensor signal less than 25 mmHg. LED Indicators or Optional Errors Output: Electrical Output _ 10mA @ 5VDC, Blinking Rate_1 second on, 1 second off, Power on, vacuum above control range: Red blinking, Vacuum reaches upper control range: Green, Solid,Error Condition, Shutdown: Red Solid. -
Our Degassing Vacuum Control System is designed for simple plug and play operation into most of our degassing chambers. Simply provide 24DC and the system will automatically provide vacuum to the specified vacuum level. Built in continuous head purges ensure that moisture and vapor are swept out of the pump to maintain consistent performance. An optional connector is available for LED error outputs. This all new generation of pumps is characterized of being almost entirely silent - a remarkable upgrade from older versions. It’s also lighter and operates with less vibrations. Errors Detected: 1 Pumpdown: Prep_Unable to reach 110 mmHg in 10 minutes., Analytical_Unable to reach 80 mmH6 in 10 minutes, 2 High Vacuum: Prep_Vacuum more than 110 mmHg for more than 6 min in the running state (after pump down)., Analytical_Vacuum more than 80 mmHg for more than 6 min in the running state (after pump down)., 3 Sensor Signal: Sensor Failure Detected, sensor signal less than 25 mmHg. LED Indicators or Optional Errors Output: Electrical Output _ 10mA @ 5VDC, Blinking Rate_1 second on, 1 second off, Power on, vacuum above control range: Red blinking, Vacuum reaches upper control range: Green, Solid,Error Condition, Shutdown: Red Solid. -
9000-1585 is a controlled vacuum source assembly that includes a single stage vacuum pump and a PCB controller to maintain vacuum levels. There is a connector for optional external LED indicators or error outputs -
The Dual Stage Pump (DST) is a vacuum control system for use with IDEX degassing chambers and PCB control systems. The analytical version is designed for standard degassing chambers and fluids. The pump is also available in side mount versions. -
-
The Dual Stage Pump (DST) is a vacuum control system for use with IDEX degassing chambers and PCB control systems. The analytical version is designed for standard degassing chambers and fluids. The pump is also available in side mount versions. -
The Dual Stage Pump (DST) is a vacuum control system for use with IDEX degassing chambers and PCB control systems. The analytical version is designed for standard degassing chambers and fluids. The pump is also available in side mount versions.REPLACED BY 9000-2061. -
The Dual Stage Pump (DST) is a vacuum control system for use with IDEX degassing chambers and PCB control systems. The prep versions are designed to handle high vapor loads from high flow rate chambers or fluids with low vapor pressure that will cause increased solvent pervaporation through the membrane. The pump is also available in side mount versions. -
The Dual Stage Pump (DST) is a vacuum control system for use with IDEX degassing chambers and PCB control systems. The prep versions are designed to handle high vapor loads from high flow rate chambers or fluids with low vapor pressure that will cause increased solvent pervaporation through the membrane. The pump is also available in bottom mount versions. -
Replaced by 9000-1896 (click to open) The Systec ZHCR (Zero Hysteresis / Constant Run) Preparative vacuum pump is designed for membrane degassing of the HPLC mobile phase. Employing a patented closedloop, micro-stepping, RPM control-strategy permits the pump to run with continuously variable speed, providing quick pull-down at high RPM, and then sustaining a consistent vacuum level at low RPM. -
The Systec ZHCR (Zero Hysteresis / Constant Run) Analytical vacuum pump is designed for membrane degassing of the HPLC mobile phase. Employing a patented closedloop, micro-stepping, RPM control-strategy permits the pump to run with continuously variable speed, providing quick pull-down at high RPM, and then sustaining a consistent vacuum level at low RPM. -
Our PEEK High Pressure Tee Assembly is strong and durable handling a pressure rating 5000 psi (345 bar). Manufactured from biocompatible PEEK delivers excellent chemical resistance to commonly used solvents. It comes equipped with convenient mounting holes. Brochure -
Our PEEK Low Pressure Tee Assembly is strong and durable handling a pressure rating 500 psi . It has excellent chemical resistance to commonly used solvents. Our assembly comes equipped with conveniently placed mounting holes. This assembly comes complete with (3) P-335 Nuts. Brochure -
Our Tefzel (ETFE) Low Pressure Tee Assembly can handle a pressure rating 500 psi(34 bar). It is designed with convenient mounting holes. The P-633 is designed for 1/8"OD tubing. This assembly comes complete with (3) P-245 Nuts and (3) P-200N Ferrules. Brochure -
Our Tefzel (ETFE) Low Pressure Tee Assembly can precisely handle a pressure rating 1000 psi (69 bar). It is designed with convenient mounting holes. This assembly is designed for 1/16"OD tubing. It comes complete with (3) P-245 Nuts and (3) P-200N Ferrules. Brochure -
Our Tefzel (ETFE) Rotor Seal is a polymeric disc that ensures a high pressure seal against the stator. Manufactured from Tefzel (ETFE), it offers excellent solvent resistance and good thread strength. It is for valve model 9010. -
Our Tefzel (ETFE) Cap is designed to effectively cap and seal off tubing. Tefzel (ETFE) features a higher temperature threshold, increased strength, and lower gas permeability. It is designed for 10-32 Coned Ports and has a Standard Knurl head style. Our cap is yellow and is also available in black. Brochure -
Our Tefzel (ETFE) Cap is designed to effectively cap and seal off tubing. Tefzel (ETFE) features a higher temperature threshold, increased strength, and lower gas permeability. It is designed for 10-32 Coned Ports and has a Standard Knurl head style. Our cap is yellow and is also available in black. Brochure -
Our Tefzel (ETFE) Cap is designed to effectively cap and seal off tubing. Tefzel (ETFE) features a higher temperature threshold, increased strength, and lower gas permeability. Our cap is for 1/4-28 Flat-Bottom Ports and has a Standard Knurl head style. -
Our Tefzel (ETFE) Cap is designed to effectively cap and seal off tubing. Tefzel (ETFE) features a higher temperature threshold, increased strength, and lower gas permeability. Our cap is for M6 Flat-Bottom Ports and has a Standard Knurl head style. -
Our kit provides three of the most common inner diameters of Tefzel tubing used in HPLC systems. Tefzel (ETFE) Tubing delivers enhanced pressure-holding capabilities and continuous mechanical stability. Tefzel tubing is also ideal for solvent resistance. The unique material used for this tubing provides low gas permeability. This kit includes: (2) 1528 Tefzel Tubing - 1/16" OD x .030" ID x 5', (2) 1529 Tefzel Tubing - 1/16" OD x .010" ID x 5', (2) 1530 Tefzel Tubing - 1/8" OD x .062" ID x 5' (1) A-327 Polymer Tubing Cutter. -
Tefzel (ETFE) Tubing delivers enhanced pressure-holding capabilities and continuous mechanical stability. Tefzel tubing is also ideal for solvent resistance. The unique material used for this tubing provides low gas permeability. It comes in natural color. -
Our Tefzel (ETFE) Plug can effectively be used to close off unused ports in valves and multi-port connectors. Tefzel (ETFE) offers excellent solvent resistance. It is for 1/4-28 Flat-Bottom Ports. It comes in natural color. Brochure
