-
Our Standard Micro-Splitter Valve has 1/4-28 Flat-Bottom thread capacity. This IDEX Health and Science Micro-Splitter Valve is designed to precisely split and control a low flow stream off a single incoming supply. It is made for interfacing LC-MS systems. This assembly includes (3)OD x P-235 Flangeless Fittings. -
Our biocompatible, PEEK Back Pressure Regulator (BPR) Assembly delivers consistent incremental back pressure. It reliably prevents system over-pressurization or additional inline pressure for more efficient system performance. It has a 1000 psi (69 bar) pressure setting. It comes with (1) P-769, (2) P-250, (2) LT-115. -
This Back Pressure Regulator (BPR) Holder is biocompatible. We designed this BPR Holder to efficiently work with any of our replacement BPR cartridges. It is made of chemically resistant PEEK. This holder comes with (2) P-250 ferrules and (2) LT-115 nuts both for 1/16"OD tubing. -
Our Graduated Micro-Splitter Valve provides the all the benefits the Micro-Splitter Valve plus the ability to set the split flow to repeatable settings. It is for a 10-32 coned threaded configuration and comes with a stainless steel needle. -
Our Flanged Fitting is made from versatile Delrin. Our versatile Delrin nut resists cross threading or loosening during use delivering excellent dimensional stability It includes a 316 stainless steel washer. This fitting is compatible with a 1/4-28 Flat-Bottom port geometry. Our Delrin fitting has a 5/16" Standard Knurl Head style and is for is for 1/16"OD Tubing. It comes is blue, black, Cream, green, Red, white and in TEFZEL (ETFE). Brochure -
Our Flanged Fitting is made from versatile Delrin. Our versatile Delrin nut resists cross threading or loosening during use delivering excellent dimensional stability It includes a 316 stainless steel washer. This fitting is compatible with a 1/4-28 Flat-Bottom port geometry. Our Delrin fitting has a 5/16" Standard Knurl Head style and is for is for 1/16"OD Tubing. It comes is blue, black, Cream, green, Red, white and in TEFZEL (ETFE). Brochure -
Our Flanged Fitting is made from versatile Delrin. Our versatile Delrin nut resists cross threading or loosening during use delivering excellent dimensional stability It includes a 316 stainless steel washer. This fitting is compatible with a 1/4-28 Flat-Bottom port geometry. Our Delrin fitting has a 5/16" Standard Knurl Head style and is for is for 1/16"OD Tubing. It comes is blue, black, Cream, green, Red, white and in TEFZEL (ETFE). Brochure -
Our Flanged Fitting is made from versatile Delrin. Our versatile Delrin nut resists cross threading or loosening during use delivering excellent dimensional stability It includes a 316 stainless steel washer. This fitting is compatible with a 1/4-28 Flat-Bottom port geometry. Our Delrin fitting has a 5/16" Square Head style and is for is for 1/8"OD Tubing. It comes is black. Brochure -
Stainless Steel Replacement Washers are strong and durable. They were designed specifically for 1/8" OD tubing and used with Flanged Fittings. These washers come in a 10 pack. Brochure -
Our PEEK Y Connector Assembly can split a stream or join two streams together similar to a "T" design. Unlike a "T" the geometry of the "Y" design reduces turbulence and improves analytical results. It is for 1/16" OD tubing. This assembly comes with (3) P-235 Flangeless Fittings. Brochure -
Our PEEK Y Connector Assembly can split a stream or join two streams together similar to a "T" design. Unlike a "T" the geometry of the "Y" design reduces turbulence and improves analytical results. It is for 1/8" OD tubing. This assembly comes with (3)OD x P-335 Flangeless Fittings. Brochure -
Our PEEK Y Connector assembly is for 1/8"OD tubing. Our Y Connectors can split a stream or join two streams together similar to a "T" design. Unlike the "T", the geometry of the "Y" design reduces turbulence and improves analytical results. This assembly comes with (3)OD x P-335 Flangeless Fittings. Brochure
