-
Our Pressure Relief Valve Assembly specifically prevents system over-pressurization. It offers consistent protection to system components by diverting fluid flow automatically when inline pressure exceeds the set limit. Our assembly has a pressure setting of 5psi (0.3 bar) and is for 1/16"OD tubing. It comes with (1)OD x P-201 Flangeless Fitting. -
Our Pressure Relief Valves are ideal for preventing system over-pressurization. This Pressure Relief assembly diverts fluids automatically when inline pressure exceeds set limits. The P-612 Pressure Relief "T" Assembly is for 1/16" Tubing OD. This Assembly comes with a P-201 Flangeless Fitting. It also is available for 3/16" Tubing OD. -
Our Quick-Stop Luer Check Valve is specifically designed to provide inline luer connect/disconnect convenience while avoiding spills. It offers Check Valve protection with Luer convenience. It is made from biocompatible PEEK with gold-plated stainless steel spring. -
Our Quick-Stop Luer Check Valve Assembly is specifically designed to provide inline luer connect/disconnect convenience while avoiding spills. It offers Check Valve protection with Luer convenience. It is made from biocompatible PEEK with gold-plated stainless steel spring Check Valve includes (1) P-697 Quick-Stop Luer Check Valve and (1) P-655 Adapter. -
Our Capillary Sample Trap Columns are ideal for separating and concentrating and/or purifying biological samples for mass spectrometer analysis. This assembly comes equipped with a NanoFilter Capsule and a Titanium Frit. -
This PEEK Sample Trap Column Coupler is specifically created to connect two or more Capillary Sample Trap Columns in sequence. Our PEEK material offers excellent chemical resistance. Our Sample Trap Columns are ideal for separating and concentrating and/or purifying biological samples for mass spectrometer analysis. -
Our SealTight Flangeless Nut design makes high pressure flat-bottom 1/16" OD tubing connections possible. It's unique design minimizes tubing twists and typically is tightened only 1/4 turn past the point of initial compression. It has a 1/4-28 Flat-Bottom port configuration and is for 1/16" OD tubing. It is short in length and comes in black. Brochure -
This SealTight Ferrule was created for the 2-Piece SealTight Fingertight Fittings. It has a slotted end which creates a second compression zone. The forward cone on the ferrule provides outstanding gripping power and a leak-free seal. It comes as a single or in a 10 pack. Brochure -
This SealTight Ferrule was created for the 2-Piece SealTight Fingertight Fittings. It has a slotted end which creates a second compression zone. The forward cone on the ferrule provides outstanding gripping power and a leak-free seal. It comes as a single or in a 10 pack. Brochure
-
This PEEK, Short, Hex-head Two-Piece SealTight Fingertight Fitting is designed so that the nut and ferrule create dual compression. The forward cone on the ferrule provides outstanding gripping power and a leak-free seal. Manufactured for biocompatible PEEK it offers excellent chemical resistance. It comes in black, has a 10-32 port configuration, is for 1/16"OD tubing and comes with Ferrule F-192. Brochure -
This PEEK Short, Two-Piece SealTight Fingertight Fitting is optimally designed so that the nut and ferrule create dual compression. The forward cone on the ferrule provides outstanding gripping power and a leak-free seal. Manufactured from biocompatible PEEK it offers excellent chemical resistance. It is black, has a 10-32 Coned port configuration is designed to connect to 1/16"OD tubing. This assembly comes with Ferrule F-192 and is available as a single set or a 10 pack. Brochure -
This PEEK Short, Two-Piece SealTight Fingertight Fitting is optimally designed so that the nut and ferrule create dual compression. The forward cone on the ferrule provides outstanding gripping power and a leak-free seal. Manufactured from biocompatible PEEK it offers excellent chemical resistance. It is black, has a 10-32 Coned port configuration is designed to connect to 1/16"OD tubing. This assembly comes with Ferrule F-192 and is available as a single set or a 10 pack. Brochure -
This PEEK Long, Two-Piece SealTight Fingertight Fitting is optimally designed so that the nut and ferrule create dual compression. The forward cone on the ferrule provides outstanding gripping power and a leak-free seal. Manufactured from biocompatible PEEK it offers excellent chemical resistance. It is black, has a 10-32 Coned port configuration is designed to connect to 1/16"OD tubing. This assembly comes with Ferrule F-192 and is available as a single set or a 10 pack. Brochure -
Our Two-Piece SealTight Fingertight Fitting is designed so that the nut and ferrule create dual compression. The forward cone on the ferrule provides outstanding gripping power and a leak-free seal. Manufactured for biocompatible PEEK it offers excellent chemical resistance. It has a 10-32 port configuration, is for 1/16"OD tubing and comes with Ferrule F-192. It comes in black. Brochure -
Our SealTight Two-Piece Fingertight Fitting is designed so that the nut and ferrule create dual compression. The forward cone on the ferrule provides outstanding gripping power and a leak-free seal. Flush Nuts offers the answer for those tight-space applications where nut heads often interfere with each other. Manufactured from durable and strong stainless steel, it can withstand high pressures. It has a 10-32 port configuration, is for 1/16"OD tubing and comes with Ferrule F-192. Brochure -
Biocompatible Semi-Prep Inline Filters consist of a durable stainless steel body and has a biocompatible, 100% PEEK flow path. Our design makes this filter ideal for higher flow analytical, semi-prep and preparative applications. It has a porosity of 5µm and is for 1/4"OD tubing. -
Biocompatible Semi-Prep Inline Filters consist of a durable stainless steel body and has a biocompatible, 100% PEEK flow path. Our design makes this filter ideal for higher flow analytical, semi-prep and preparative applications. It has a porosity of 5µm and if for 3/16"OD tubing. -
Our Semi-Prep Filter Assembly is uniquely designed for high flow applications. It adds only 50 psi (3 bar) additional back pressure. It has a porosity of 10µm and included stainless steel frit (1) A-331. -
Our Semi-Prep Filter Assembly is meticulously designed for high flow applications. It is SFC and HPLC compatible. It has a porosity of 10µm and includes a stainless steel frit (1) A-331 . -
Our Semi Prep Guard Cartridge Assembly is designed to accompany the C-1000 Semi-Prep Guard Column. This convenient cartridge system is easy to pack and will hold up to high pressure and is carefully treated to prevent galling. -
Our Semi-Prep Unpacked Guard Column Holder offers excellent column protection. This convenient cartridge system is easy to pack and will hold up to high pressure and is carefully treated to prevent galling. -
Our Semi-Prep Inline Filter Assembly is ideal for higher flow analytical, semi-prep and preparative applications. It consists of a durable stainless steel body and a biocompatible 100% PEEK flow path. It has a porosity of 10µm and comes with Frit OC-803. -
Our Semi-Prep Inline Filter Assembly is ideal for higher flow analytical, semi-prep and preparative applications. It consists of a durable stainless steel body and a biocompatible 100% PEEK flow path. It has a porosity of 2µm and comes with Frit OC-802. -
Our Semi-Prep Stainless Steel Frit is the most common size frits used throughout HPLC systems. We design these frits to deliver excellent uniform porosity and a long filtration life. It has a porosity of .5µm. -
Our Semi-Prep Stainless Steel Frit is the most common size frits used throughout HPLC systems. We design these frits to deliver excellent uniform porosity and a long filtration life. It has a porosity of 2µm and comes with a natural color Tefzel(r) (ETFE) ring. It comes as a single or in a 10 pack. -
Our Semi-Prep Stainless Steel Frit is the most common size frits used throughout HPLC systems. We design these frits to deliver excellent uniform porosity and a long filtration life. It has a porosity of 2µm. -
Female LuerTight Fitting Systems reliably holds your fluoropolymer tubing in place while giving the convenience of a luer connection. Our system's streamline design allows for an easy and quick disconnect and no need for barbs. This Systems is for 1/8" OD tubing and includes one ferrule. It can be used with Set Plug P-830T. Brochure -
Our Shut Off Valve Assembly is designed to quickly stops the flow of a stream. The body of the assembly is made from biocompatible Tefzel (ETFE) and features a PEEK rotor making it highly resistant to chemical attack. P-721 includes (2) P-335 Flangeless Fittings and (2) P-300N Flangeless Ferrules. The P-721A comes without fittings. *Please note that the shut-off valve has an updated appearance compared to the illustrative image due to a change in rotor design. -
Our Shut Off Valve Assembly is designed to quickly stops the flow of a stream. The body of the assembly is made from biocompatible Tefzel (ETFE) and features a PEEK rotor making it highly resistant to chemical attack. P-721 includes (2) P-335 Flangeless Fittings and (2) P-300N Flangeless Ferrules. The P-721A comes without fittings. *Please note that the shut-off valve has an updated appearance compared to the illustrative image due to a change in rotor design. -
Our Shut-Off Valve Assembly is designed to quickly stops the flow of a stream. The body of the assembly is made from solvent resistant Tefzel (ETFE) and features a PEEK rotor making it highly resistant to chemical attack. It includes (2) XP-235 Flangeless Fittings for 1/16" OD tubing. It comes in blue. *Please note the valve may appear different from previous version. -
Our Shut-Off Valve Assembly is designed to quickly stops the flow of a stream. The body of the assembly is made from solvent resistant Tefzel (ETFE) and features a PEEK rotor making it highly resistant to chemical attack. Our Shut-Off Valve Assembly includes (2) XP-335 Flangeless Fittings for 1/8" OD tubing. It comes in blue. *Please note the valve may appear different from previous version. -
Our Inlet Solvent Filter is made from inert, biocompatible UHMWPE. This solvent filter allow you to pass tubing through to the bottom of the filter cup which enables the filter the to efficiently withdraw solvent from within 0.10 inches of the bottom of the solvent bottle. Filter Cups with a porosity of 10µm for Filters A-426, A-445, A-446 & A-447. They also come as a single or in a 5 pack.
-
Our Stainless Steel Frit is designed specifically to work well throughout HPLC systems. We design these frits to deliver excellent uniform porosity and a long filtration life. It has a porosity of .5µm. These Frits are available in a 10 pack. -
Patented, Stainless Steel Bottom-of-the-Bottle Filter Assemblies have an enhanced design that draws solvent from within 1/8" of the bottom of the bottle. It includes convenient, inexpensive replaceable filter cups making it an economical choice. It has a porosity of 10µm and is for 1/8" OD tubing. Out assembly comes with a stainless steel filter cup (A-520) and (1) XP-130 Flangeless Fitting. -
Patented, Stainless Steel Bottom-of-the-Bottle Filter Assemblies have an enhanced design that draws solvent from within 1/8" of the bottom of the bottle. It includes convenient, inexpensive replaceable filter cups making it an economical choice. It has a porosity of 2µm and is for 1/8" OD tubing. Our assembly comes with a stainless steel filter cup (A-522) and (1) XP-130 Flangeless Fitting. -
Our Stainless Steel BPR Holder is mechanically designed to work with any of our BPR cartridges. It is specifically surface-treated to prevent galling, a potential problem with large, threaded material. Our holder has a swept volume of 4µL and comes with (2) F-300 Fittings.
