-
Our Biocompatible Back Pressure Regulator (BPR) Assembly offers proven outgassing protection and enhances system performance. It optimally delivers incremental back pressure of 5 psi (0.3 bar). This BPR Assembly includes (2) x P-215 Flangeless Fittings including ferrules. NOTE: This special pre-set back pressure regulator assembly is available as an assembly ONLY – replacement cartridges are NOT available separately. CAUTION: Do not wrench tighten or loosen the back pressure regulator assembly. Doing so will void the preset pressure calibration. -
Our BPR Assembly offers proven outgassing protection which enhances system performance and improves pump check valve efficiency. It includes a biocompatible cartridge and provides a reliable 316 stainless steel holder. It has a pressure setting of 500 psi (34 bar). It comes with (1) P-765 Cartridge and (2)OD x P-201 Flangeless Fittings. -
Our Biocompatible Back Pressure Regulator (BPR) Assembly offers proven outgassing protection and enhances system performance. It optimally delivers incremental back pressure of 500 psi (34 bar). This BPR Assembly includes (1) P-765 BPR Cartridge (2) P-250 Ferrules and (2) LT-115 Nuts. -
Our BPR Assembly offers proven outgassing protection which enhances system performance and improves pump check valve efficiency. It includes a biocompatible cartridge and provides a reliable 316 stainless steel holder. It has a pressure setting of 75 psi (2.8 bar). It comes with (1) P-762 Cartridge and (2)OD x P-201 Flangeless Fittings. -
Our Biocompatible Back Pressure Regulator (BPR) Assembly offers proven outgassing protection and enhances system performance. It optimally delivers incremental back pressure of 75 psi (5.2 bar). Our BPR assembly includes (1) P-762 BPR Cartridge and (2)OD x P-215 Flangeless Fittings. -
Our BPR Assembly offers proven outgassing protection which enhances system performance and improves pump check valve efficiency. It includes a biocompatible cartridge and provides a reliable 316 stainless steel holder. It has a pressure setting of 750 psi (52 bar). It comes with (1) P-795 Cartridge and (2)OD x P-201 Flangeless Fittings. -
Our biocompatible, PEEK Back Pressure Regulator (BPR) Assembly delivers consistent incremental back pressure. It reliably prevents system over-pressurization or additional inline pressure for more efficient system performance. It has a 1000 psi (69 bar) pressure setting. It comes with (1) P-769, (2) P-250, (2) LT-115. -
Our practical Replacement Back Pressure Regulator (BPR) Cartridge (P-763) operates as an easy to use, replaceable component for our BPR systems. Our Cartridge can conveniently be used with any of our standard BRP Holders and creates a back pressure of 100 psi (7 bar). It is constructed from PEEK, Tefzel (EFTE), PCTFE and has a gold plated stainless steel spring delivering reliable usage. It comes with a tan body and red cap. -
Our Replacement Back Pressure Regulator (BPR) Cartridge operates as an easy to use, replaceable component for our BPR systems. We constructed this cartridge from PEEK, Tefzel (EFTE), PCTFE and included a gold plated stainless steel spring delivering consistent, reliable usage. It is conveniently designed be used with any of our standard BRP Holders and creates a back pressure of 1000 psi (34 bar). It comes with a black body with green end cap. -
Our practical Replacement Back Pressure Regulator (BPR) Cartridge operates as an easy to use, replaceable component for our BPR systems. Our cartridge can easily be used with any of our standard BRP Holders and creates a back pressure of 250 psi (17 bar). It is constructed from PEEK, Tefzel (EFTE), PCTFE and has a gold plated stainless steel spring delivering reliable usage. It comes with a tan body and white cap. -
Our practical Replacement Back Pressure Regulator (BPR) Cartridge operates as an easy to use, replaceable component for our BPR systems. It is constructed from PEEK, Tefzel (EFTE), PCTFE and has a gold plated stainless steel spring delivering reliable usage. Our cartridge can conveniently be used with any of our standard BRP Holders and creates a back pressure of 40 psi (2.8 bar). It comes with a tan body and a blue cap. -
Our practical Replacement Back Pressure Regulator (BPR) Cartridge operates as an easy to use, replaceable component for our BPR systems. It is constructed from PEEK, Tefzel (EFTE), PCTFE and has a gold plated stainless steel spring delivering reliable usage. Our specialized cartridge can be easily used with any of our durable standard BRP Holders and creates a back pressure of 500 psi (34 bar). It comes with a tan body and green cap. -
Our practical Replacement Back Pressure Regulator (BPR) Cartridge (P-762) operates as an easy to use, replaceable component for our BPR systems. It is constructed from PEEK, Tefzel (EFTE), PCTFE and has a gold plated stainless steel spring delivering reliable usage. It can conveniently be used with any of our standard BRP Holders and creates a back pressure of 75 psi (5.2 bar). It has a tan body and yellow end cap. -
Our replacement Back Pressure Regulator (BPR) Cartridge operates as an easy to use, replaceable component for our BPR systems. We constructed this cartridge from PEEK, Tefzel (EFTE), PCTFE and included a gold plated stainless steel spring delivering consistent, reliable usage. It is conveniently designed to be used with any of our standard BRP Holders and creates a back pressure of 750 psi (34 bar). It comes with a black body and blue end cap. -
This Back Pressure Regulator (BPR) Holder is biocompatible. We designed this BPR Holder to efficiently work with any of our replacement BPR cartridges. It is made of chemically resistant PEEK. This holder comes with (2) P-250 ferrules and (2) LT-115 nuts both for 1/16"OD tubing. -
Bulkhead Quick-Stop Luer Check Valve Assembly is designed to provide inline luer connect/disconnect convenience while avoiding spills. Get Check Valve protection with Luer convenience with our PEEK Check Valve. It comes a gold-plated stainless steel spring. -
Our Stainless Steel Bulkhead Union Assembly are precision machined from 316 stainless steel. Our mechanically strong and reliable union offers true zero dead volume (ZDV) allowing tubing to be joined without interrupting the fluidic path. The bulkhead union is manufactured for easily plumbing tubing through equipment housing. It is designed for 1/16"OD tubing, thru-hole of .040 and has a 10-32 Flat-Bottom thread port configuration. -
Our PEEK Bulkhead Union is optimally designed to be thread directly through equipment housing to connect internal tubing to the outside. It is manufactured from biocompatible PEEK giving is excellent chemical resistance to virtually all commonly used solvents. It has an internal thread of 14-28. The Bulkhead Union includes a stainless steel nut/lock washer. It comes in Red, blue, black, green and natural. Brochure -
Our PEEK Bulkhead Union is optimally designed to be thread directly through equipment housing to connect internal tubing to the outside. It is manufactured from biocompatible PEEK giving is excellent chemical resistance to virtually all commonly used solvents. It has an internal thread of 14-28. The Bulkhead Union includes a stainless steel nut/lock washer. It comes in Red, blue, black, green and natural. Brochure -
Our PEEK Bulkhead Union is optimally designed to be thread directly through equipment housing to connect internal tubing to the outside. It is manufactured from biocompatible PEEK giving is excellent chemical resistance to virtually all commonly used solvents. It has an internal thread of 14-28. The Bulkhead Union includes a stainless steel nut/lock washer. It comes in Red, blue, black, green and natural. Brochure -
Our PEEK Bulkhead Union is optimally designed to be thread directly through equipment housing to connect internal tubing to the outside. It is manufactured from biocompatible PEEK giving is excellent chemical resistance to virtually all commonly used solvents. It has an internal thread of 14-28. The Bulkhead Union includes a stainless steel nut/lock washer. It comes in Red, blue, black, green and natural. Brochure -
Our PEEK Bulkhead Union is optimally designed to be thread directly through equipment housing to connect internal tubing to the outside. It is manufactured from biocompatible PEEK giving is excellent chemical resistance to virtually all commonly used solvents. It has an internal thread of 14-28. The Bulkhead Union includes a stainless steel nut/lock washer. It comes in Red, blue, black, green and natural. Brochure -
Our PEEK Bulkhead Union is specifically designed to be thread directly through equipment housing to connect internal tubing to the outside. It is manufactured from biocompatible PEEK giving is excellent chemical resistance to virtually all commonly used solvents. It has an internal thread of 10-32 and it includes a stainless steel nut/lock washer. It is natural color. Brochure -
Our PEEK Bulkhead Union is specifically designed to be thread directly through equipment housing to connect internal tubing to the outside. It is manufactured from biocompatible PEEK giving is excellent chemical resistance to virtually all commonly used solvents. It has an internal thread of 10-32 and it includes a stainless steel nut/lock washer. It comes in black. Brochure -
Inline Cartridge Check Valves are designed to limit flow in one direction and deliver a low cracking pressure. Ideal placement for the CV-3000 would be on the effluent side of the column to prevent post-column derivatization agents from flowing back and poisoning the column if the HPLC mobile phase pump were to shut down. It includes (1) CV-3001 Cartridge and (2)OD x P-215 Flangeless Fittings for 1/16"OD tubing. -
Inline Cartridge Check Valves are designed to limit flow in one direction and deliver a low cracking pressure. Ideal placement for the CV-3000 would be on the effluent side of the column to prevent post-column derivatization agents from flowing back and poisoning the column if the HPLC mobile phase pump were to shut down. It includes (1) CV-3001 Cartridge and (2)OD x P-215 Flangeless Fittings for 1/16"OD tubing.
-
Our standard Inlet Check Valve adds back-flow protection to any 1/4-28 flat-bottom port. Made from PEEK, PCTFE, perfluoroelastomer, PTFE and stainless steel it offers excellent chemical resistance. It's spring actuated sealing system eliminates back-flow, helping prevents upstream contamination or damage. It has a cracking pressure of 15psi (1 bar) and a 1/4-28 Flat-Bottom Male to 1/4-28 Flat-Bottom Female thread port configuration. -
Our standard Inlet Check Valve adds back-flow protection to any 1/4-28 flat-bottom port. Made from PEEK, PCTFE, perfluoroelastomer, PTFE and stainless steel it offers excellent chemical resistance. It's spring actuated sealing system eliminates back-flow, helping prevents upstream contamination or damage. It has a cracking pressure of 3psi and 1/4-28 Flat-Bottom Male to 1/4-28 Flat-Bottom Female thread port configuration. -
Our Non-Metallic Inlet Check Valve is biocompatible and delivers a low cracking pressure. It is made from PEEK and Perfluoroelastomer giving it excellent chemical resistance. Metal free composition makes this check valve perfect for use with corrosive fluids and biological samples. It has a female to male 1/4-28 thread port configuration and a .020 thru hole. -
Our Inlet Non-Metallic Check Valve is biocompatible and delivers a low cracking pressure. It is made from PEEK and Perfluoroelastomer giving it excellent chemical resistance. Metal free composition makes this check valve perfect for use with corrosive fluids and biological samples. It has a female 1/4-28 to 10-32 male thread port configuration and a .020 thru hole. -
Our Non-Metallic Inlet Check Valve is biocompatible and delivers a low cracking pressure. It is made from PEEK and Perfluoroelastomer giving it excellent chemical resistance. Metal free composition makes this check valve perfect for use with corrosive fluids and biological samples. It has a female to male 1/4-28 thread port configuration and a .040 thru hole. -
Our Non-Metallic Inlet Check Valve is biocompatible and delivers a low cracking pressure. It is made from PEEK and Perfluoroelastomer giving it excellent chemical resistance. Metal free composition makes this check valve perfect for use with corrosive fluids and biological samples. It has a female to male 1/4-28 thread port configuration and a .060 thru hole. -
Our Inline Check Valve Assembly is designed to optimally limit flow in one direction. Our valve is strong and durable and delivers a 3 psi cracking pressure. It includes (1) CV-3001 Cartridge and (2)OD x P-315 Flangeless Fittings for 1/8"OD tubing. -
Our Inline Cartridge is for assembly CV-3000. This cartridge is made of biocompatible, inert PEEK and has a gold plated stainless steel spring. It's cracking pressure is 1.5 psi (0.1 bar). -
Our Check Valve Inline Cartridge is made of durable ethylene propylene and has a stainless steel spring. It is for assembly CV-3010. The cracking pressure for the Inline Cartridge is 3 psi (0.2 bar) and has a 1/4-28 thread port configuration. -
Inline Cartridge Check Valves are designed to limit flow in one direction and deliver a low cracking pressure (3psi). It includes (1) CV-3010 Cartridge and (2) XP-315 Flangeless Fittings for 1/8" OD tubing.
