-
Our PEEK ZDV Union Assembly ensures a reliable connection for tubing. It effectively addresses this need in the high pressure region of a system where a dependable connection is imperative. It provides zero dead volume ZDV which allows tubing to butt against each other allow the fluidic path to be undisturbed. Our Union assembly includes (2) F-300 Fingertight Fittings. It also comes without Fittings. Brochure -
Our Tefzel (ETFE) Cap is designed to effectively cap and seal off tubing. Tefzel (ETFE) features a higher temperature threshold, increased strength, and lower gas permeability. It is designed for 10-32 Coned Ports and has a Standard Knurl head style. Our cap is yellow and is also available in black. Brochure -
Our Tefzel (ETFE) Cap is designed to effectively cap and seal off tubing. Tefzel (ETFE) features a higher temperature threshold, increased strength, and lower gas permeability. It is designed for 10-32 Coned Ports and has a Standard Knurl head style. Our cap is yellow and is also available in black. Brochure -
Our Tefzel (ETFE) Cap is designed to effectively cap and seal off tubing. Tefzel (ETFE) features a higher temperature threshold, increased strength, and lower gas permeability. Our cap is for 1/4-28 Flat-Bottom Ports and has a Standard Knurl head style. -
Our Tefzel (ETFE) Cap is designed to effectively cap and seal off tubing. Tefzel (ETFE) features a higher temperature threshold, increased strength, and lower gas permeability. Our cap is for M6 Flat-Bottom Ports and has a Standard Knurl head style. -
Designed to Bridge between Rigid-Walled Tubing and Soft-Walled Tubing. Supplied in 2-pack. For use with 1.20-2.80 mm ID Peristaltic Tubing with an OD up to 4.55 mm. Our Peristaltic Tubing Adapter Sets facilitate a secure connection between soft-walled, peristaltic tubing and more traditional, rigid-walled tubing. Through the use of a ribbed nose that fits securely inside the soft-walled tubing and a retainer sleeve that slips over the soft-walled tubing, this adapter firmly holds peristaltic tubing in place, while simultaneously allowing more permanent 1/16" OD tubing (e.g., FEP, PEEK, Stainless Steel) to be joined on the other end through the use of the Flangeless Fittings (included). These 2-pack sets allows you to make your own stoppered tubing assembly for use with some peristaltic pumps, while also minimizing the amount of soft-walled tubing that must be used in the fluid pathway. These adapters can be used with soft-walled tubing with a variety of inner diameters and outer diameters, as indicated. Brochure -
Our PEEK ZDV Union Assembly ensures a reliable connection for tubing. ZDV - Zero Dead Volume allows tubing to butt end-to-end keeping the path of fluid flowing. This Union effectively addresses this need in the high pressure region of a system where a dependable connection is imperative. It includes (2) F-300 Fingertight Fittings. Brochure -
Our practical Replacement Back Pressure Regulator (BPR) Cartridge operates as an easy to use, replaceable component for our BPR systems. It is constructed from PEEK, Tefzel (EFTE), PCTFE and has a gold plated stainless steel spring delivering reliable usage. Our cartridge can conveniently be used with any of our standard BRP Holders and creates a back pressure of 40 psi (2.8 bar). It comes with a tan body and a blue cap. -
Our practical Replacement Back Pressure Regulator (BPR) Cartridge (P-762) operates as an easy to use, replaceable component for our BPR systems. It is constructed from PEEK, Tefzel (EFTE), PCTFE and has a gold plated stainless steel spring delivering reliable usage. It can conveniently be used with any of our standard BRP Holders and creates a back pressure of 75 psi (5.2 bar). It has a tan body and yellow end cap. -
Our practical Replacement Back Pressure Regulator (BPR) Cartridge (P-763) operates as an easy to use, replaceable component for our BPR systems. Our Cartridge can conveniently be used with any of our standard BRP Holders and creates a back pressure of 100 psi (7 bar). It is constructed from PEEK, Tefzel (EFTE), PCTFE and has a gold plated stainless steel spring delivering reliable usage. It comes with a tan body and red cap. -
Our practical Replacement Back Pressure Regulator (BPR) Cartridge operates as an easy to use, replaceable component for our BPR systems. Our cartridge can easily be used with any of our standard BRP Holders and creates a back pressure of 250 psi (17 bar). It is constructed from PEEK, Tefzel (EFTE), PCTFE and has a gold plated stainless steel spring delivering reliable usage. It comes with a tan body and white cap. -
Our practical Replacement Back Pressure Regulator (BPR) Cartridge operates as an easy to use, replaceable component for our BPR systems. It is constructed from PEEK, Tefzel (EFTE), PCTFE and has a gold plated stainless steel spring delivering reliable usage. Our specialized cartridge can be easily used with any of our durable standard BRP Holders and creates a back pressure of 500 psi (34 bar). It comes with a tan body and green cap.
