-
PEEK High Pressure Cross Assembly is precisely designed to withstand environmental stresses in the high pressure regions of a system. It is made from inert PEEK, which is ideal for chemical resistance. P-729 includes (4) F-300 Fingertight Fittings allowing maximum operating pressure to 3500 psi (241 bar) when used with 1/16"OD stainless steel or PEEK tubing. Brochure -
PEEK High Pressure Cross Assembly is precisely designed to withstand environmental stresses in the high pressure regions of a system. It is made from inert PEEK, which is ideal for chemical resistance. P-730 includes (4) F-300 Fingertight Fittings allowing maximum operating pressure to 3500 psi (241 bar) when used with 1/16"OD stainless steel or PEEK tubing. Brochure -
Our PEEK ZDV Union Assembly ensures a reliable connection for tubing. It effectively addresses this need in the high pressure region of a system where a dependable connection is imperative. It provides zero dead volume ZDV which allows tubing to butt against each other allow the fluidic path to be undisturbed. Our Union assembly includes (2) F-300 Fingertight Fittings. It also comes without Fittings. Brochure -
Our Tefzel (ETFE) Cap is designed to effectively cap and seal off tubing. Tefzel (ETFE) features a higher temperature threshold, increased strength, and lower gas permeability. It is designed for 10-32 Coned Ports and has a Standard Knurl head style. Our cap is yellow and is also available in black. Brochure -
Our Tefzel (ETFE) Cap is designed to effectively cap and seal off tubing. Tefzel (ETFE) features a higher temperature threshold, increased strength, and lower gas permeability. It is designed for 10-32 Coned Ports and has a Standard Knurl head style. Our cap is yellow and is also available in black. Brochure -
Our Tefzel (ETFE) Cap is designed to effectively cap and seal off tubing. Tefzel (ETFE) features a higher temperature threshold, increased strength, and lower gas permeability. Our cap is for M6 Flat-Bottom Ports and has a Standard Knurl head style. -
Our PEEK ZDV Union Assembly ensures a reliable connection for tubing. ZDV - Zero Dead Volume allows tubing to butt end-to-end keeping the path of fluid flowing. This Union effectively addresses this need in the high pressure region of a system where a dependable connection is imperative. It includes (2) F-300 Fingertight Fittings. Brochure -
Our special MicroTight Adapters were created specifically to facilitate connecting fused silica and other capillary tubing to standard 1/16"OD tubing or standard luer-lock connectors. It is manufactured from biocompatible PEEK who's distinct material delivers excellent chemical resistance. Includes (1)1 F-120, (1) F-125, (1) P-554. Brochure -
Our MicroTight Unions Assembly is used specifically to easily connect capillary tubing together. True ZDV (Zero Dead Volume) allows two pieces of tubing to connect directly to each other using the included gauge and plug to ensure proper alignment. This allows for an uninterrupted fluidic path. It is for use with 1/32OD Tubing and includes (2) F-126S Fittings and (1) P-553 Gauge. Brochure -
Our MicroTight Union Assembly is used specifically to connect capillary tubing together. It features a 0.015" thru-hole which adds only a small amount of additional flow-path volume to help ensure proper chromatographic results. It has a 360umOD and includes (2) F-152 fittings and (2) P-416BLK Micro-Fingertight Fittings. Brochure -
Our Biocompatible, MicroTee is used to effectively join 1/16" capillary tubing together. It is made from inert PEEK, which is ideal for chemical resistance. Our MicroTee is specifically designed with a 0.006" thruhole that delivers a low swept volume. It has a .025 tubing OD. It includes(3) F-172 (3) P-416. Brochure -
Our Biocompatible, MicroCross is used to effectively join 1/16" capillary tubing together. It is made from inert PEEK, which is ideal for chemical resistance. Our MicroTee is specifically designed with a 0.006" thruhole that delivers a low swept volume. It has a .025 tubing OD. It includes (4)F-172 (4) P-416. Brochure
