-
Our 4 Way PEEK Bulkhead Flow Valve is ideal if your application involves low frequency of use and demands operator control or involves injection of smaller sample volumes. Manufactured from biocompatible PEEK, it offers excellent chemical resistance. It has 1/4-28 ports and is for 1/16" OD tubing. It is available is diagonal flow, right angle "L" flow and Single "T" flow. -
Our 4 Way PEEK Bulkhead Flow Valve is ideal if your application involves low frequency of use and demands operator control or involves injection of smaller sample volumes. Manufactured from biocompatible PEEK, it offers excellent chemical resistance. It has 1/4-28 ports and is for 1/16" OD tubing. It is available is diagonal flow, right angle "L" flow and Single "T" flow. -
Our 4 Way PEEK Bulkhead Flow Valve is ideal if your application involves low frequency of use and demands operator control or involves injection of smaller sample volumes. Manufactured from biocompatible PEEK, it offers excellent chemical resistance. It has 1/4-28 ports and is for 1/16" OD tubing. It is available is diagonal flow, right angle "L" flow and Single "T" flow. -
Bulkhead Quick-Stop Luer Check Valve Assembly is designed to provide inline luer connect/disconnect convenience while avoiding spills. Get Check Valve protection with Luer convenience with our PEEK Check Valve. It comes a gold-plated stainless steel spring. -
Inline Cartridge Check Valves are designed to limit flow in one direction and deliver a low cracking pressure. Ideal placement for the CV-3000 would be on the effluent side of the column to prevent post-column derivatization agents from flowing back and poisoning the column if the HPLC mobile phase pump were to shut down. It includes (1) CV-3001 Cartridge and (2)OD x P-215 Flangeless Fittings for 1/16"OD tubing. -
Inline Cartridge Check Valves are designed to limit flow in one direction and deliver a low cracking pressure. Ideal placement for the CV-3000 would be on the effluent side of the column to prevent post-column derivatization agents from flowing back and poisoning the column if the HPLC mobile phase pump were to shut down. It includes (1) CV-3001 Cartridge and (2)OD x P-215 Flangeless Fittings for 1/16"OD tubing.
-
Our standard Inlet Check Valve adds back-flow protection to any 1/4-28 flat-bottom port. Made from PEEK, PCTFE, perfluoroelastomer, PTFE and stainless steel it offers excellent chemical resistance. It's spring actuated sealing system eliminates back-flow, helping prevents upstream contamination or damage. It has a cracking pressure of 15psi (1 bar) and a 1/4-28 Flat-Bottom Male to 1/4-28 Flat-Bottom Female thread port configuration. -
Our standard Inlet Check Valve adds back-flow protection to any 1/4-28 flat-bottom port. Made from PEEK, PCTFE, perfluoroelastomer, PTFE and stainless steel it offers excellent chemical resistance. It's spring actuated sealing system eliminates back-flow, helping prevents upstream contamination or damage. It has a cracking pressure of 3psi and 1/4-28 Flat-Bottom Male to 1/4-28 Flat-Bottom Female thread port configuration. -
Our Non-Metallic Inlet Check Valve is biocompatible and delivers a low cracking pressure. It is made from PEEK and Perfluoroelastomer giving it excellent chemical resistance. Metal free composition makes this check valve perfect for use with corrosive fluids and biological samples. It has a female to male 1/4-28 thread port configuration and a .020 thru hole. -
Our Inlet Non-Metallic Check Valve is biocompatible and delivers a low cracking pressure. It is made from PEEK and Perfluoroelastomer giving it excellent chemical resistance. Metal free composition makes this check valve perfect for use with corrosive fluids and biological samples. It has a female 1/4-28 to 10-32 male thread port configuration and a .020 thru hole. -
Our Non-Metallic Inlet Check Valve is biocompatible and delivers a low cracking pressure. It is made from PEEK and Perfluoroelastomer giving it excellent chemical resistance. Metal free composition makes this check valve perfect for use with corrosive fluids and biological samples. It has a female to male 1/4-28 thread port configuration and a .040 thru hole. -
Our Non-Metallic Inlet Check Valve is biocompatible and delivers a low cracking pressure. It is made from PEEK and Perfluoroelastomer giving it excellent chemical resistance. Metal free composition makes this check valve perfect for use with corrosive fluids and biological samples. It has a female to male 1/4-28 thread port configuration and a .060 thru hole. -
Our Inline Check Valve Assembly is designed to optimally limit flow in one direction. Our valve is strong and durable and delivers a 3 psi cracking pressure. It includes (1) CV-3001 Cartridge and (2)OD x P-315 Flangeless Fittings for 1/8"OD tubing. -
Our Inline Cartridge is for assembly CV-3000. This cartridge is made of biocompatible, inert PEEK and has a gold plated stainless steel spring. It's cracking pressure is 1.5 psi (0.1 bar). -
Our Check Valve Inline Cartridge is made of durable ethylene propylene and has a stainless steel spring. It is for assembly CV-3010. The cracking pressure for the Inline Cartridge is 3 psi (0.2 bar) and has a 1/4-28 thread port configuration. -
Inline Cartridge Check Valves are designed to limit flow in one direction and deliver a low cracking pressure (3psi). It includes (1) CV-3010 Cartridge and (2) XP-315 Flangeless Fittings for 1/8" OD tubing. -
Our Inline Non-Metallic Check Valve is biocompatible and delivers a low cracking pressure. It is made from PEEK and Perfluoroelastomer giving it excellent chemical resistance. Metal free composition makes this check valve perfect for use with corrosive fluids and biological samples. It has a female to female 1/4-28 thread port configuration and a .020 thru hole. -
Our Inline Non-Metallic Check Valve is biocompatible and delivers a low cracking pressure. It is made from PEEK and Perfluoroelastomer giving it excellent chemical resistance. Metal free composition makes this check valve perfect for use with corrosive fluids and biological samples. It has a female to female 10-32 thread port configuration and a .020 thru hole. -
Our standard Outlet Check Valve adds back-flow protection to any 10-32 Coned Port. Made from PEEK, PCTFE, perfluoroelastomer, PTFE and stainless steel it offers excellent chemical resistance. It's spring actuated sealing system eliminates back-flow, helping prevents upstream contamination or damage. It has a cracking pressure of 15psi (1 bar) and a 10-32 Coned Male to 10-32 Coned Female thread port configuration. -
Our Outlet Non-Metallic Check Valve is biocompatible and delivers a low cracking pressure. It is made from PEEK and Perfluoroelastomer giving it excellent chemical resistance. Metal free composition makes this check valve perfect for use with corrosive fluids and biological samples. It has a female 1/4-28 to 10-32 male thread port configuration and a .020 thru hole. -
Our standard Outlet Check Valve adds back-flow protection to any 1/4-28 flat-bottom port. Made from PEEK, PCTFE, perfluoroelastomer, PTFE and stainless steel it offers excellent chemical resistance. It's spring actuated sealing system eliminates back-flow, helping prevents upstream contamination or damage. It has a cracking pressure of 3psi and a 1/4-28 Flat-Bottom Male to 1/4-28 Flat-Bottom Female thread port configuration. -
Our standard Outlet Check Valve adds back-flow protection to any 1/4-28 flat-bottom port. Made from PEEK, PCTFE, perfluoroelastomer, PTFE and stainless steel it offers excellent chemical resistance. It's spring actuated sealing system eliminates back-flow, helping prevents upstream contamination or damage. It has a 1/4-28 Flat-Bottom Male to 1/4-28 Flat-Bottom Female thread port configuration. -
Our Non-Metallic Outlet Check Valve is biocompatible and delivers a low cracking pressure. It is made from PEEK and Perfluoroelastomer giving it excellent chemical resistance. Metal free composition makes this check valve perfect for use with corrosive fluids and biological samples. It has a female to male 1/4-28 thread port configuration and a .020 thru hole. -
Our Non-Metallic Outlet Check Valve is biocompatible and delivers a low cracking pressure. It is made from PEEK and Perfluoroelastomer giving it excellent chemical resistance. Metal free composition makes this check valve perfect for use with corrosive fluids and biological samples. It has a female to male 1/4-28 thread port configuration and a .040 thru hole. -
Our Non-Metallic Outlet Check Valve is biocompatible and delivers a low cracking pressure. It is made from PEEK and Perfluoroelastomer giving it excellent chemical resistance. Metal free composition makes this check valve perfect for use with corrosive fluids and biological samples. It has a female to male 1/4-28 thread port configuration and a .060 thru hole. -
Our Graduated Micro-Splitter Valve provides the all the benefits the Micro-Splitter Valve plus the ability to set the split flow to repeatable settings. It is for a 10-32 coned threaded configuration and comes with a stainless steel needle. -
Our PEEK Micro-Metering Valve assembly is designed for the control of fluid flow rates. These needle valves are ideally used with peristaltic pumps, pump fluid-transfer, mass spectometry and fraction collection. It includes (2) F-120 Fingertight Fittings. It is also available without fittings. -
Our PEEK Micro-Metering Valve assembly is designed for the control of fluid flow rates. These needle valves are ideally used with peristaltic pumps, pump fluid-transfer, mass spectometry and fraction collection. is for 1/16"OD tubing. It includes (2) P-230 Flangeless Fittings. It is also available without Fittings. -
Our PEEK Micro-Metering Valve assembly is designed for the control of fluid flow rates. These needle valves are ideally used with peristaltic pumps, pump fluid-transfer, mass spectometry and fraction collection. It includes (2) F-120 Fingertight Fittings. It is also available without fittings.
-
Our PEEK Micro-Metering Valve assembly is designed for the control of fluid flow rates. These needle valves are ideally used with peristaltic pumps, pump fluid-transfer, mass spectometry and fraction collection. It includes (2)OD x P-330 Flangeless Fittings. -
Our Standard Micro-Splitter Valve has 1/4-28 Flat-Bottom thread capacity. This IDEX Health and Science Micro-Splitter Valve is designed to precisely split and control a low flow stream off a single incoming supply. It is made for interfacing LC-MS systems. This assembly includes (3)OD x P-235 Flangeless Fittings. -
Our Micro-Volume Inline Check Valve is biocompatible and delivers a low cracking pressure. It is made from PEEK and Perfluoroelastomer giving it excellent chemical resistance. Metal free composition makes this check valve perfect for use with corrosive fluids and biological samples. It offers a low swept volume. It has a female to female 10-32 thread port configuration and a .010 thru hole. -
Our Quick-Stop Luer Check Valve is specifically designed to provide inline luer connect/disconnect convenience while avoiding spills. It offers Check Valve protection with Luer convenience. It is made from biocompatible PEEK with gold-plated stainless steel spring. -
Our Quick-Stop Luer Check Valve Assembly is specifically designed to provide inline luer connect/disconnect convenience while avoiding spills. It offers Check Valve protection with Luer convenience. It is made from biocompatible PEEK with gold-plated stainless steel spring Check Valve includes (1) P-697 Quick-Stop Luer Check Valve and (1) P-655 Adapter. -
Our Shut Off Valve Assembly is designed to quickly stops the flow of a stream. The body of the assembly is made from biocompatible Tefzel (ETFE) and features a PEEK rotor making it highly resistant to chemical attack. P-721 includes (2) P-335 Flangeless Fittings and (2) P-300N Flangeless Ferrules. The P-721A comes without fittings. *Please note that the shut-off valve has an updated appearance compared to the illustrative image due to a change in rotor design. -
Our Shut Off Valve Assembly is designed to quickly stops the flow of a stream. The body of the assembly is made from biocompatible Tefzel (ETFE) and features a PEEK rotor making it highly resistant to chemical attack. P-721 includes (2) P-335 Flangeless Fittings and (2) P-300N Flangeless Ferrules. The P-721A comes without fittings. *Please note that the shut-off valve has an updated appearance compared to the illustrative image due to a change in rotor design.
