-
LiteTouch Ferrules are specifically designed to help prevent polymer tubing from twisting during the tightening process. Our ferrule has a durable stainless steel lock ring which ensures that the it stays in place on the tubing when the fitting system is loosened from its receiving port. It is designed for 1/16" OD tubing and has a 1-32 Coned Thread Port Configuration. It comes in natural color and is also available in a 10 pack. -
Our Tefzel (ETFE) Cap is designed to effectively cap and seal off tubing. Tefzel (ETFE) features a higher temperature threshold, increased strength, and lower gas permeability. Our cap is for 1/4-28 Flat-Bottom Ports and has a Standard Knurl head style. -
Our RefractoMax RI Detector provides accurate Refractive index detection with sharp peeks and consistent performance. It is available in three flow rate options. -
Our RefractoMax RI Detector provides accurate Refractive index detection with sharp peeks and consistent performance. It is available in three flow rate options. -
Our RefractoMax RI Detector provides accurate Refractive index detection with sharp peeks and consistent performance. It is available in three flow rate options. -
Avoid over filling of your waste bottle. Light sent down into the glass rod is reflected back as long as the liquid surface level is below the glass rod.As soon as the liquid level reaches the glass rod the light is scattered away from the glass rod and the sensor detects this and gives an output. The level sensor is normally mounted on a bottle cap or similar. It consists of a ground glass rod, and electronics for detecting fluid on the rod end. The level sensor is powered by 5VDC and the output is a TTL. When the liquid level is below the glass rod the output is high (+5 VDC), and when the liquid reaches the glass rod the output is low (0 VDC). A visual and acoustic alarm is built-in to the level sensor which signals light and sound through a LED and a buzzer when the liquid reaches the glass rod. This is an OEM product that we can customize for your need! -
-
The Systec ZHCR (Zero Hysteresis / Constant Run) Analytical vacuum pump is designed for membrane degassing of the HPLC mobile phase. Employing a patented closedloop, micro-stepping, RPM control-strategy permits the pump to run with continuously variable speed, providing quick pull-down at high RPM, and then sustaining a consistent vacuum level at low RPM. -
Replaced by 9000-1896 (click to open) The Systec ZHCR (Zero Hysteresis / Constant Run) Preparative vacuum pump is designed for membrane degassing of the HPLC mobile phase. Employing a patented closedloop, micro-stepping, RPM control-strategy permits the pump to run with continuously variable speed, providing quick pull-down at high RPM, and then sustaining a consistent vacuum level at low RPM. -
The Dual Stage Pump (DST) is a vacuum control system for use with IDEX degassing chambers and PCB control systems. The analytical version is designed for standard degassing chambers and fluids. The pump is also available in side mount versions.REPLACED BY 9000-2061. -
Our Degassing Vacuum Control System is designed for simple plug and play operation into most of our degassing chambers. Simply provide 24DC and the system will automatically provide vacuum to the specified vacuum level. Built in continuous head purges ensure that moisture and vapor are swept out of the pump to maintain consistent performance. An optional connector is available for LED error outputs. This all new generation of pumps is characterized of being almost entirely silent - a remarkable upgrade from older versions. It’s also lighter and operates with less vibrations. -
Our Degassing Vacuum Control System is designed for simple plug and play operation into most of our degassing chambers. Simply provide 24DC and the system will automatically provide vacuum to the specified vacuum level. Built in continuous head purges ensure that moisture and vapor are swept out of the pump to maintain consistent performance. An optional connector is available for LED error outputs. This all new generation of pumps is characterized of being almost entirely silent - a remarkable upgrade from older versions. It’s also lighter and operates with less vibrations. Errors Detected: 1 Pumpdown: Prep_Unable to reach 110 mmHg in 10 minutes., Analytical_Unable to reach 80 mmH6 in 10 minutes, 2 High Vacuum: Prep_Vacuum more than 110 mmHg for more than 6 min in the running state (after pump down)., Analytical_Vacuum more than 80 mmHg for more than 6 min in the running state (after pump down)., 3 Sensor Signal: Sensor Failure Detected, sensor signal less than 25 mmHg. LED Indicators or Optional Errors Output: Electrical Output _ 10mA @ 5VDC, Blinking Rate_1 second on, 1 second off, Power on, vacuum above control range: Red blinking, Vacuum reaches upper control range: Green, Solid,Error Condition, Shutdown: Red Solid. -
Our Degassing Vacuum Control System is designed for simple plug and play operation into most of our degassing chambers. Simply provide 24DC and the system will automatically provide vacuum to the specified vacuum level. Built in continuous head purges ensure that moisture and vapor are swept out of the pump to maintain consistent performance. An optional connector is available for LED error outputs. This all new generation of pumps is characterized of being almost entirely silent - a remarkable upgrade from older versions. It’s also lighter and operates with less vibrations. Errors Detected: 1 Pumpdown: Prep_Unable to reach 110 mmHg in 10 minutes., Analytical_Unable to reach 80 mmH6 in 10 minutes, 2 High Vacuum: Prep_Vacuum more than 110 mmHg for more than 6 min in the running state (after pump down)., Analytical_Vacuum more than 80 mmHg for more than 6 min in the running state (after pump down)., 3 Sensor Signal: Sensor Failure Detected, sensor signal less than 25 mmHg. LED Indicators or Optional Errors Output: Electrical Output _ 10mA @ 5VDC, Blinking Rate_1 second on, 1 second off, Power on, vacuum above control range: Red blinking, Vacuum reaches upper control range: Green, Solid,Error Condition, Shutdown: Red Solid. -
Our Degassing Vacuum Control System is designed for simple plug and play operation into most of our degassing chambers. Simply provide 24DC and the system will automatically provide vacuum to the specified vacuum level. Built in continuous head purges ensure that moisture and vapor are swept out of the pump to maintain consistent performance. An optional connector is available for LED error outputs. This all new generation of pumps is characterized of being almost entirely silent - a remarkable upgrade from older versions. It’s also lighter and operates with less vibrations. Errors Detected: 1 Pumpdown: Prep_Unable to reach 110 mmHg in 10 minutes., Analytical_Unable to reach 80 mmH6 in 10 minutes, 2 High Vacuum: Prep_Vacuum more than 110 mmHg for more than 6 min in the running state (after pump down)., Analytical_Vacuum more than 80 mmHg for more than 6 min in the running state (after pump down)., 3 Sensor Signal: Sensor Failure Detected, sensor signal less than 25 mmHg. LED Indicators or Optional Errors Output: Electrical Output _ 10mA @ 5VDC, Blinking Rate_1 second on, 1 second off, Power on, vacuum above control range: Red blinking, Vacuum reaches upper control range: Green, Solid,Error Condition, Shutdown: Red Solid. -
The Dual Stage Pump (DST) is a vacuum control system for use with IDEX degassing chambers and PCB control systems. The analytical version is designed for standard degassing chambers and fluids. The pump is also available in side mount versions. -
Our NanoTight Kits are carefully manufactured using Dupont(r) FEP fluoropolymer - a highly inert, melt-processed polymer that serves as an excellent alternative to PTFE. A wide assortment of sleeves is available, ensuring the availability of a NanoTight sleeve for most applications. Our kit is designed to increase flexibility and convenience at a lower per-piece price than if the components were purchased separately. It comes with (10) .007 ID sleeves and (4) F-330N Nut, NanoTight(tm), Long, With F-142N Ferrule, Peek(tm), 10-32, natural. -
Our NanoTight kit allows you to easily connect capillary tubing to standard 1/16" ports. Our NanoTight Kits are carefully manufactured using Dupont(r) FEP fluoropolymer - a highly inert, melt-processed polymer that serves as an excellent alternative to PTFE. Our kit is designed to increase flexibility and convenience at a lower per-piece price than if the components were purchased separately. It has a (10) .0085 ID tubing sleeves and (4) F-330N Nut, NanoTight(tm), Long, With F-142N Ferrule, Peek(tm), 10-32, natural color. -
Our NanoTight kit allows you to easily connect capillary tubing to standard 1/16" ports. Our NanoTight Kits are carefully manufactured using Dupont(r) FEP fluoropolymer - a highly inert, melt-processed polymer that serves as an excellent alternative to PTFE. Our kit is designed to increase flexibility and convenience at a lower per-piece price than if the components were purchased separately. It comes with (10) orange .013 ID tubing sleeves and (4) F-330N Nut, NanoTight(tm), Long, With F-142N Ferrule, Peek(tm), 10-32, natural color. -
Our NanoTight kit allows you to easily connect capillary tubing to standard 1/16" ports. Our NanoTight Kits are carefully manufactured using Dupont(r) FEP fluoropolymer - a highly inert, melt-processed polymer that serves as an excellent alternative to PTFE. Our kit is designed to increase flexibility and convenience at a lower per-piece price than if the components were purchased separately. It comes with (10) green .015 ID tubing sleeves and (4) F-330N Nut, NanoTight(tm), Long, With F-142N Ferrule, Peek(tm), 10-32, natural color. -
Our NanoTight kit allows you to easily connect capillary tubing to standard 1/16" ports. Our NanoTight Kits are carefully manufactured using Dupont(r) FEP fluoropolymer - a highly inert, melt-processed polymer that serves as an excellent alternative to PTFE. Our kit is designed to increase flexibility and convenience at a lower per-piece price than if the components were purchased separately. It comes with (10) black .018 ID tubing sleeves and (4) F-330N Nut, NanoTight(tm), Long, With F-142N Ferrule, Peek(tm), 10-32, natural color. -
Our NanoTight kit allows you to easily connect capillary tubing to standard 1/16" ports. Our NanoTight Kits are carefully manufactured using Dupont(r) FEP fluoropolymer - a highly inert, melt-processed polymer that serves as an excellent alternative to PTFE. Our kit is designed to increase flexibility and convenience at a lower per-piece price than if the components were purchased separately. It comes with (10) natural color .021 ID tubing sleeves and (4) F-330N Nut, NanoTight(tm), Long, With F-142N Ferrule, Peek(tm), 10-32, natural color. -
This NanoTight kit allows you to easily connect capillary tubing to standard 1/16" ports. Our NanoTight Kits are carefully manufactured using Dupont(r) FEP fluoropolymer - a highly inert, melt-processed polymer that serves as an excellent alternative to PTFE. Our kit is designed to increase flexibility and convenience at a lower per-piece price than if the components were purchased separately. It comes with (10) yellow .027 ID tubing sleeves and (4) F-330N Nut, NanoTight(tm), Long, With F-142N Ferrule, Peek(tm), 10-32, natural color. -
Our NanoTight kit allows you to easily connect capillary tubing to standard 1/16" ports. Our NanoTight Kits are carefully manufactured using Dupont(r) FEP fluoropolymer - a highly inert, melt-processed polymer that serves as an excellent alternative to PTFE. Our kit is designed to increase flexibility and convenience at a lower per-piece price than if the components were purchased separately. It comes with (10) green .033 ID tubing sleeves and (4) F-330N Nut, NanoTight(tm), Long, With F-142N Ferrule, Peek(tm), 10-32, natural color. -
Stainless Steel Tubing Kits offer It varies in types and quantities of components included; however, all the kits offered are designed to increase flexibility and convenience at a lower per-piece price than if the components were purchased separately. Our Stainless Steel Tubing Kit contains .010 in and .020 ID tubing. -
Stainless Steel Tubing Kit varies in types and quantities of components included; however, all the kits offered are designed to increase flexibility and convenience at a lower per-piece price than if the components were purchased separately. This kit has a tubing ID of .010". -
Stainless Steel Tubing Kits vary in types and quantities of components included; however, all the kits offered are designed to increase flexibility and convenience at a lower per-piece price than if the components were purchased separately. This kit has a tubing ID of .007. It includes (10) U-126 Stainless Steel Tubing, .007" ID x 1/16" OD x 5cm, black and (10) U-127 Stainless Steel Tubing, .007" ID x 1/16" OD x 10cm, black 10 -
Stainless Steel Tubing Kits vary in types and quantities of components included; however, all the kits offered are designed to increase flexibility and convenience at a lower per-piece price than if the components were purchased separately. Our kit has a tubing ID of .005. -
Stainless Steel Tubing Kits vary in types and quantities of components included; however, all the kits offered are designed to increase flexibility and convenience at a lower per-piece price than if the components were purchased separately. Our kit has a tubing ID of .0020. -
Our kit provides three of the most common inner diameters of Tefzel tubing used in HPLC systems. Tefzel (ETFE) Tubing delivers enhanced pressure-holding capabilities and continuous mechanical stability. Tefzel tubing is also ideal for solvent resistance. The unique material used for this tubing provides low gas permeability. This kit includes: (2) 1528 Tefzel Tubing - 1/16" OD x .030" ID x 5', (2) 1529 Tefzel Tubing - 1/16" OD x .010" ID x 5', (2) 1530 Tefzel Tubing - 1/8" OD x .062" ID x 5' (1) A-327 Polymer Tubing Cutter. -
Our Biocompatible, PEEK Tubing Kit is optimized for use in high-pressure applications. Its distinct materials make it inert to most solvents and give it a smooth internal surface that improves the resolution of sample bands. We have developed a variety of color options for easy coding and identification. It Includes (2) 1531B PEEK Tubing, .010" ID x 1/16" OD x 5', blue, (2) 1532 PEEK Tubing, .020" ID x 1/16" OD x 5', orange, (2) 1534 PEEK Tubing, .062" ID x 1/8" OD x 5', natural and (1) A-327 Polymer Tubing Cutter.
