-
Our Column Saver Precolumn Filter delivers the protection your column system needs. Compatible with either stainless steel or PEEK tubing and delivering universal connection with all manufacturers' fittings. It is available in a single unit or in a 10 pack. -
Our Conductive ferrule is ideal for electrospray applications, try our Conductive Ferrule instead of graphite ferrules. Because of its elastomeric properties, you can reuse this ferrule through many tightening/retightening cycles - unlike most graphite ferrules. It is for 360µm OD tubing. -
Our Conical Adapter Assemblies facilitate the connection of rigid and semi-rigid walled tubing to soft-walled peristaltic tubing with a variety of inner diameters. The unique design of this adapter incorporates a two-stage nose onto which soft-walled tubing can be pressed, and the rigid-walled tubing is connected to the other end of the adapter assembly through the use of the included Super Flangeless(tm) fittings. Several options exist in this family, facilitating the connection of either 1/16" OD or 1/8" OD rigid and semi-rigid walled tubing and soft-walled tubing with an inner diameter as large as 1/8" (3.2 mm), as indicated. Brochure -
Our Conical Adapter Assemblies facilitate the connection of rigid and semi-rigid walled tubing to soft-walled peristaltic tubing with a variety of inner diameters. The unique design of this adapter incorporates a two-stage nose onto which soft-walled tubing can be pressed, and the rigid-walled tubing is connected to the other end of the adapter assembly through the use of the included Super Flangeless(tm) fittings. Several options exist in this family, facilitating the connection of either 1/16" OD or 1/8" OD rigid and semi-rigid walled tubing and soft-walled tubing with an inner diameter as large as 1/8" (3.2 mm), as indicated. Brochure -
Our Conical Adapter Assemblies facilitate the connection of rigid and semi-rigid walled tubing to soft-walled peristaltic tubing with a variety of inner diameters. The unique design of this adapter incorporates a two-stage nose onto which soft-walled tubing can be pressed, and the rigid-walled tubing is connected to the other end of the adapter assembly through the use of the included Super Flangeless(tm) fittings. Several options exist in this family, facilitating the connection of either 1/16" OD or 1/8" OD rigid and semi-rigid walled tubing and soft-walled tubing with an inner diameter as large as 1/8" (3.2 mm), as indicated. Brochure -
Our Conical Adapter Assemblies facilitate the connection of rigid and semi-rigid walled tubing to soft-walled peristaltic tubing with a variety of inner diameters. The unique design of this adapter incorporates a two-stage nose onto which soft-walled tubing can be pressed, and the rigid-walled tubing is connected to the other end of the adapter assembly through the use of the included Super Flangeless(tm) fittings. Several options exist in this family, facilitating the connection of either 1/16" OD or 1/8" OD rigid and semi-rigid walled tubing and soft-walled tubing with an inner diameter as large as 1/8" (3.2 mm), as indicated. Brochure -
Our Conical Adapter Bodies offer a great solution for connecting soft-walled tubing of varying ID to a 1/4-28 flat-bottom receiving port. They are manufactured from either Tefzel® (ETFE, for superior chemical resistance) or PEEK polymer (for mechanical strength and reliable chemical compatibility), and they feature a two-stage stem over which you can guide your soft-walled tubing to securely hold it in place. Brochure -
Our Conical Adapter Bodies offer a great solution for connecting soft-walled tubing of varying ID to a 1/4-28 flat-bottom receiving port. They are manufactured from either Tefzel(r) (ETFE, for superior chemical resistance) or PEEK polymer (for mechanical strength and reliable chemical compatibility), and they feature a two-stage stem over which you can guide your soft-walled tubing to securely hold it in place. Brochure -
Our Conical Adapter Bodies offer a great solution for connecting soft-walled tubing of varying ID to a 1/4-28 flat-bottom receiving port. They are manufactured from either Tefzel® (ETFE, for superior chemical resistance) or PEEK polymer (for mechanical strength and reliable chemical compatibility), and they feature a two-stage stem over which you can guide your soft-walled tubing to securely hold it in place. Brochure -
The Biotech knitted open tubular (KOT) reactors are made from tubing which has been knitted into a tortuous path to force the fast moving centre of the liquid stream to mix radially with the slower moving boundary liquid layer, thereby minimizing the axial dispersion. The shape of a chromatographic peak entering the reactor is thus preserved very efficiently. To ensure a stable radial mixing within the KOT, a linear flow rate of 10 cm/s or more is recommended. The KOT reactor is usually the most optimal delay element for use in analytical flow systems, and is typically inserted in the flow path to create a delay line, so that a reaction or other event that requires a certain time can take place. Example of applications: effecient mixing of two fluidic streams, delay coil in a fluidic system, on-line derivatization of a sample with UV light etc. -
Our Bottom Mount Dual-Stage Pump (DST) with Constant Performance PCB is a vacuum control system for use with IDEX film degassing chambers. The system includes a DST vacuum pump and a controller PCB that operates in two modes:- Similar to “Constant Vacuum” degasser pumps, the control system will maintain vacuum levels at a user-defined setpoint (default 120mmHg).
- The Constant Performance algorithm allows the user to set a flow rate and desired efficiency, from which the control algorithms will determine the nominal vacuum level.
With this patent pending algorithm in our Constant Performance Degassing Pump System, the user gains the following benefits:- A Means To Select A Given Efficiency Of Degassing For Any HPLC System
- Direct Link Between The Chromatographic Method Flow Rate And Optimal Vacuum Level.
- Consistent Degassing Efficiency For Flow Rates 0-10mL/Min
- Operates At Highest Possible Pressure Minimizing Solvent Loss To The Laboratory Atmosphere.
- Reduction Of Mobile Phase Concentration Changes Due To Pervaporation
- Reduced Vacuum Pump Wear Due To Lower Pump RPM
-
Our Side Mount Dual-Stage Pump (DST) with Constant Performance PCB is a vacuum control system for use with IDEX film degassing chambers. The system includes a DST vacuum pump and a controller PCB that operates in two modes:
- Similar to “Constant Vacuum” degasser pumps, the control system will maintain vacuum levels at a user-defined setpoint (default 120mmHg).
- The Constant Performance algorithm allows the user to set a flow rate and desired efficiency, from which the control algorithms will determine the nominal vacuum level.
With this patent pending algorithm in our Constant Performance Degassing Pump System, the user gains the following benefits:- A Means To Select A Given Efficiency Of Degassing For Any HPLC System
- Direct Link Between The Chromatographic Method Flow Rate And Optimal Vacuum Level.
- Consistent Degassing Efficiency For Flow Rates 0-10mL/Min
- Operates At Highest Possible Pressure Minimizing Solvent Loss To The Laboratory Atmosphere.
- Reduction Of Mobile Phase Concentration Changes Due To Pervaporation
- Reduced Vacuum Pump Wear Due To Lower Pump RPM
-
PEEK High Pressure Cross Assembly is precisely designed to withstand environmental stresses in the high pressure regions of a system. It is made from inert PEEK, which is ideal for chemical resistance. P-729 includes (4) F-300 Fingertight Fittings allowing maximum operating pressure to 3500 psi (241 bar) when used with 1/16"OD stainless steel or PEEK tubing. Brochure -
PEEK Low Pressure Cross Assembly is strong and has a durable handling a pressure ratings of 1000 psi (69 bar). It has excellent chemical resistance to commonly used solvents. Our Cross Assembly is equipped with convenient mounting holes. This assembly comes complete with (4) P-235 Nuts. Brochure -
PEEK High Pressure Cross Assembly is precisely designed to withstand environmental stresses in the high pressure regions of a system. It is made from inert PEEK, which is ideal for chemical resistance. It includes (4) F-301 Fingertight Fittings allowing maximum operating pressure to 3500 psi (241 bar) when used with 1/16"OD stainless steel or PEEK tubing. Brochure -
PEEK High Pressure Cross Assembly is precisely designed to withstand environmental stresses in the high pressure regions of a system. It is made from inert PEEK, which is ideal for chemical resistance. P-730 includes (4) F-300 Fingertight Fittings allowing maximum operating pressure to 3500 psi (241 bar) when used with 1/16"OD stainless steel or PEEK tubing. Brochure -
PEEK Low Pressure Cross Assembly is strong and has a durable handling at a pressure ratings of 1000 psi (69 bar). It has excellent chemical resistance to commonly used solvents. Our Cross assembly comes equipped with conveniently placed mounting holes. It includes (4) P-335 Nuts. Brochure -
Our Tefzel (ETFE) Low Pressure Cross Assembly can handle a pressure rating 1000 psi (69 bar). It is designed with convenient mounting holes. The P-634 is designed for 1/16"OD tubing. This assembly comes complete with (4) P-245 Nuts and (4) P-200N Ferrules. Brochure -
Our Tefzel (ETFE) Low Pressure Cross Assembly can handle a pressure rating 500 psi(34 bar). It is designed with convenient mounting holes. The P-635 is designed for 1/8"OD tubing. This assembly comes complete with (4) P-345 Nuts and (4) P-200N Ferrules. Brochure -
Ready to use kit, including 10 pcs PEEK Flangeless Fittings and 12 pcs of ETFE Ferrules. To be used with 1/16 OD tubing, for example P/N 0716. 1/4"-28 Threaded Nuts suited for easy connection to the Degasser ports. -
Ready to use kit, including 10 pcs PPS Flangeless Fittings and 12 pcs of ETFE Ferrules. To be used with 1/8 OD tubing, for example P/N 0704. 1/4"-28 Threaded Nuts suited for easy connection to the Degasser ports. -
Our all-PEEK One Piece Super Flangeless Fitting is excellent for those connections that need to be broken frequently and tubing assemblies because they swage onto the tubing. Manufactured from biocompatible PEEK, it offers superior chemical resistance. It has an 1/4-28 Flat-Bottom port configuration and is for 1/16"OD Tubing, for example P/N 0716. -
Our All-PEEK One Piece Super Flangeless is optimally designed for those connections that need to be broken frequently and tubing assemblies because they swage onto the tubing. Manufactured from biocompatible PEEK, it offers excellent chemical resistance. It has an 1/-28 Flat-Bottom port configuration and is for 1/8"OD Tubing, for example P/N 0704. -
Ready to use kit, including 10 pcs Supgerflangeless Fittings and 10 pcs of ETFE Ferrules. To be used with 1/16 OD tubing, for example P/N 0716. 1/4"-28 Threaded Nuts suited for easy connection to the Degasser ports. -
Ready to use kit, including 10 pcs Supgerflangeless Fittings and 10 pcs of ETFE Ferrules. To be used with 1/8 OD tubing, for example P/N 0704. 1/4"-28 Threaded Nuts suited for easy connection to the Degasser ports. -
With virtually identical chemical resistance to PFA at a lower price, FEP tubing is great for general, low pressure applications. Compared to PTFE, FEP (fluorinated ethylene propylene) tubing is held to tighter tolerances and has lower gas permeability -
With virtually identical chemical resistance to PFA at a lower price, FEP tubing is great for general, low pressure applications. Compared to PTFE, FEP (fluorinated ethylene propylene) tubing is held to tighter tolerances and has lower gas permeability -
Our Delrin Plug is manufactured from Delrin offering excellent chemical resistance. It is specifically designed to close off unused ports in valves and multi-port connectors. It has a Standard Knurl Head Style. It is for 5/16-24 Coned Ports and comes in white. Brochure -
Dupont FEP Tubing is excellent for use with general low pressure applications. Our FEP tubing is held to extremely tight tolerances and has a lower gas permeability. We offer some of our FEP tubing in color tinted options that are translucent, making it easy to identify transfer lines and still be able to watch fluids flow. Our color coding system also allows for simple detection of tubing thru-hole size. It comes in natural color and is available in lengths of 50ft and 100ft. -
Dupont FEP Tubing is excellent for use with general low pressure applications. Our FEP tubing is held to extremely tight tolerances and has a lower gas permeability. We offer some of our FEP tubing in color tinted options that are translucent, making it easy to identify transfer lines and still be able to watch fluids flow. Our color coding system also allows for simple detection of tubing thru-hole size. It comes in natural color and is available in lengths of 50ft and 100ft.
-
Dupont FEP Tubing is excellent for use with general low pressure applications. Our FEP tubing is held to extremely tight tolerances and has a lower gas permeability. We offer our FEP tubing in color tinted options that are translucent, making it easy to identify transfer lines and still be able to watch fluids flow. Our color coding system also allows for simple detection of tubing thru-hole size. It comes in natural color and is available in lengths of 15m and 30m. -
Dupont FEP Tubing is excellent for use with general low pressure applications. Our FEP tubing is held to extremely tight tolerances and has a lower gas permeability. We offer some our FEP tubing in color tinted options that are translucent, making it easy to identify transfer lines and still be able to watch fluids flow. Our color coding system also allows for simple detection of tubing thru-hole size. It comes in natural color and is available in lengths of 15m and 30m. -
Dupont FEP Tubing is excellent for use with general low pressure applications. Our FEP tubing is held to extremely tight tolerances and has a lower gas permeability. We offer our FEP tubing in color tinted options that are translucent, making it easy to identify transfer lines and still be able to watch fluids flow. Our color coding system also allows for simple detection of tubing thru-hole size. It comes in natural color and is available in lengths of 15m and 30m. -
Dupont FEP Tubing is excellent for use with general low pressure applications. Our FEP tubing is held to extremely tight tolerances and has a lower gas permeability. We offer our FEP tubing in color tinted options that are translucent, making it easy to identify transfer lines and still be able to watch fluids flow. Our color coding system also allows for simple detection of tubing thru-hole size. It is available in lengths of 20ft and 50ft. It is available in blue and natural color. -
Versatile, Dupont FEP Tubing is an excellent choice for general low pressure applications. We have made this tubing available in color tinted options that are translucent, making it easy to identify transfer lines and still be able to watch fluids flow. It comes in lengths of 50ft and 100ft. Colors available are natural and orange.
